SOURCE: This is a Kawaski Mule
Have you checked to see if you jump the wiring on the fan that it works? If so jump the wires on the temp sensor. If it spins and works then test the temp gauge. If its not working its not telling the fan to engage. Should open 170-200 Degrees
SOURCE: remove and replace starter on 2007 kawaski mule 610 4x4
You may have this
posted in the wrong product category. Please select another category
appropriate to the problem and re-post the problem so the correct
expert will see and respond to the question..
This is for
car and truck problems.
SOURCE: where is the neutral safety switch for a kawaski 3010 mule
Kawasaki Mule Update - YouTube
? 2:16
www.youtube.com/watch?v=Fw_jeQUU6Hw
Jan 25, 2013 - Uploaded by Penguinboy1995
solenoid is reading battery voltage and the constant hot, it is not sending the 12 volts from the switch to the ...
SOURCE: where is the vin number located on a 1999 kawaski mule, need help asap thanks
For most late-model Mule™ side x side, the VIN is located on the forward frame rail below the seat. For all Trans4X4® models, the VIN is on the left rear driver seat frame rail, and Mule™ 600/610 4X4 models have it on the frame rail below the seat over the fuel tank. On most older Mule models, the VIN is near the front of the vehicle
You may have this
posted in the wrong product category. Please select another category
appropriate to the problem and re-post the problem so the correct
expert will see and respond to the question..
This is for
car and truck problems.
42 views
Usually answered in minutes!
×