I have to continuously press it for many times until i get the bike unlocked. What could be the reason? I tried using both key fobs and situation seems same.
Have you tried replacing the batteries in keyfob
SOURCE: keyfob problem
try changing the fob battery .the freelander has a fob low battery warning tone that will start after the alarm has been deactivated by the fob with a low battery and will stop after the key is switched to acc. for any one wanting info on problems with freelander , goto this web site . http://www.myfreelander.co.uk/
Testimonial: "Thanks for the reply, we will try the battery change, hope it is that simple"
SOURCE: My toyota corolla verso 2005 keyfob only locks the
From your description I think the unlock button has failed on your remote, Often you can tell as the working button will have more resistance and spring feel to it when you press them and compare.
You can either pick up a replacement shell from ebay or need to get an auto lock specialist to confirm and replace it for you, Jon
Turn the key to the ignition position. Quickly press both turn signal indicators, until a light on the dash flashes.
Enter the first digit of your 5-digit security PIN by pressing in the left-turn switch the same number of times. So if your PIN is 76543, you should press the left-turn switch six times.
Press the right-turn switch once to store the number and move to the next digit in your PIN code. Press the left turn signal six times to continue, until you get to the end. At the end of the process, the alarm will disarm and the light on the dash will stop blinking. You can now start the bike as normal
262 views
Usually answered in minutes!
×