1. Battery Voltage. - Key off: between 12 - 13VDC.
2. Key off Amp Draw - At the main fuse: < (less than) 1ADC
3. Key on Amp Draw - At the main fuse: Results will vary because of different loads.
*Note - DO NOT START THE BIKE WITH YOUR METER IN PLACE OF THE MAIN FUSE! Also, if you can not access the main fuse, put your positive meter lead on the red wire at the solenoid, and put your negative meter lead on the positive battery lead. This way you will be able to get your amperage readings AND let you start the bike without blowing your fuse.* Charging amperage should be at least 1 ADC
4. Break even speed - The RPM in which the charging voltage at the battery turns positive - Should be before Idle
5. Charging voltage at the battery - Between 13 - 15 VDC.
hope the above details help.thanks for using fixya.
Testimonial: "thanks alot was very helpful :)"
330 views
Usually answered in minutes!
×