There are two clutches. Each clutch is independently controlled by its own electro-hydraulic circuit. When a gear change occurs, the system pre-selects the target gear using the clutch not currently in use. The first clutch is then electronically disengaged as, simultaneously, the second clutch engages.
As you begin braking the transmission begins shifting downward causing compression braking, down shifting down into first gear at only a few MPH. Normally you would downshift to lower gears manually to get this braking effect. This new system does it automatically.
SOURCE: fan is not working on my africa twin motor bike
well, if its not hot enough, it will not turn on. if it is hot there, look for thermostst
33 views
Usually answered in minutes!
×