Motorcycles Logo

Related Topics:

o
olwen williams Posted on Jun 06, 2019

Hi hubby got 2002 sportster starts fine and will run ok then starts to misfire under load could this be aproblem with the plugs.

1 Answer

richardehrha

Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

Habit-Forming:

Visited the website for 3 consecutive days.

New Friend:

An expert that has 1 follower.

  • Contributor 25 Answers
  • Posted on Jun 06, 2019
richardehrha
Contributor
Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

Habit-Forming:

Visited the website for 3 consecutive days.

New Friend:

An expert that has 1 follower.

Joined: Jan 27, 2013
Answers
25
Questions
1
Helped
4508
Points
55

Could be plugs or coils

Testimonial: "thankyou will tell him .will start with plugs then om to coils."

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Nov 15, 2008

SOURCE: 1998 honda crv misfire code 0303and 0304

problem solved mechanic had wires on wrong thanks

Ad

Anonymous

  • 29 Answers
  • Posted on Nov 16, 2008

SOURCE: 99 vitara misfire?

check for codes, p0300 is multiple cylinder misfire, p0301-p0304 is for cylinder 1 through 4, could be bad plug or coil, try switching and see if problem moves to different cylinder

66 chrgr

mike loshbough

  • 1011 Answers
  • Posted on Feb 19, 2009

SOURCE: engine misses when placed under load

replace the plug wires this will fix your secondary ignition breakdown. the egr code is due to a bad dpfe sensor which is for back pressure on egr valve.this will not cause misfire.

Anonymous

  • 80 Answers
  • Posted on May 06, 2009

SOURCE: 98 mitsubishi mirage misfire or fuel prob

change the fuel pump relay

Anonymous

  • 253 Answers
  • Posted on Jun 04, 2010

SOURCE: 2002 Ford Windstar p0300 skips and backfires under load

Just put a coil on a 2002 today. Coils fail a lot with no codes given

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

GTI FSI misfire under load?

misfires are also cause from faulty injectors Check/replace the injector as the tip may be partially blocked.
0helpful
1answer
0helpful
1answer

Po302 po303 po316 code

The Codes 302 & 303 are cylinder misfire codes,google them

Spark Plugs have nothing to do with misfires,it would be rare in
a life time if one ever failed to fire

Forget the 316 just misfires on start up

A repair shop would be your best choice without knowledge,
reference material & test equip

Ignition coil or vacuum leak problem
0helpful
1answer

Cylinder misfire

replace no 2 injector
1helpful
1answer

2002 dyna misfires randomly after shifting

Hi steve
remove spark plugs check gap (clearance between electrode and terminal) . check air fuel mixture screw maybe less fuel.
0helpful
1answer

2002 Ford Windstar p0300 skips and backfires under load

Just put a coil on a 2002 today. Coils fail a lot with no codes given
0helpful
1answer

Ttr250 hase a misfire at high revs more noticeable in lower gears starts and runs fine other wise ,have replaced plug tried another lead and coil removed carby cleaned and cheched settings all seem...

I would be looking at the coil,plug lead & plug any one or all of these may be breaking down under load it may also be a loose or worn main jet in the carby are you sure your not over revving it in the lower gears that is holding the gear a little bit to long before changing
2helpful
1answer

Mountfield 4.5hp briggs starts ok runs but when under load loses power misfires for a second or two then runs ok for a bit . can you help BC

Replace Spark Plug, Check for Rust on the Flywheel and clean with wire brush, also clean coil (Flywheel end).
May 02, 2009 • Garden
0helpful
1answer

My jag runs ok on idle and misfires under load

do a compression test ?? about 180lbs anything less and it could need a valve regrind ,if compression seems ok then plugs and leads and use the bosch plugs with the 3 electrodes (for voltswagon) champion are **** and missfire.if still persists change dist cap and leads
Not finding what you are looking for?

44 views

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66931 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...