Part details: oem number is 5KR149010000 2002 model dragstar xvs 250 not vstar or xv i need a carburetor used but working i live in Turkey i have no lots of oppotunity here please help
Just google "used motorcycle parts"
Testimonial: "i have tried i dont remember how many up to now but not found yet my motorbike is little special motorbike a kind of intermediate product and i am looking for a special part so i think i need special place for this model please hepl i dont wanna let my motorcycle become rubbish if you know something or somewhere like i describe"
If it was made in China ur out of luck on spares.
that s true (unfortunately) but best way original parts that is very expensive so i decided to find second hand part if i can i couldn t find it in turkey maybe abroad
×
SOURCE: Nokia 6500 slide - RESTRICTION CODE
hi,
I have Nokia 6500 Slide locked to UK Orange Network.
IMEI Number is 352027027919833
Kindly help with a Unlock code.
Thanks.
CAISER NOMAAN
SOURCE: i have a yamaha dragstar
If it has been sitting for a while I strongly recommend you remove the carburetors and clean them thoroughly, you will need to make sure you remove all the jets, especially the pilot jets because that is the smallest jet in the carb that will plug and it is often the one that will prevent the engine from starting.
Try using some WD40 in the back of the carbs when you try to start it after you clean the carbs. I don't like to recommend starting fluid because it is volatile and can easily catch on fire if the engine backfires.
I'd also recommend replacing the spark plugs as well. Make sure you have good fire. (turn the motor over with the plugs out and grounded on the head to make sure you can see the spark)
I also recommend pouring a small amount of Marvel Mystry oil down each spark plug hole to help "reseal" the rings. Remember that sitting is not your friend and you may have to get the rings back to life by using the special oil.
Just remember you need three basic elements to make an engine run:
If you have all three of those and compression your engine will start.
Let me know if you have any further questions.
Regards,
RSelvy
SOURCE: have problems starting yamaha xvs 1100 dragstar
Hi there fellow XVS dragstar owner!
I had the same problem before. It is usually caused by the wrong jets installed. have it Replaced with the standard jets that came with it... this will solve the problem on acceleration. Make sure the fuel and air mixture knob is set to 2.5 turns-out from full close. clean the spark plugs.. better, replace it with a new one to ensure clean burning of fuel. also, use unleaded gas. this burns better.
hope this helps
-levibit-
SOURCE: 1999 yamaha dragstar paint
Go to a local FinishMaster store and they will use a color eye to find u a color
56 views
Usually answered in minutes!
×