SOURCE: All lights on my 2003 Park Avenue flicker and the
Have alternator checked for faulty regulator.
SOURCE: HV diode producing resistance of 10 ohms.
you cannot check a microwave diode with just a mutli meter . you have to make a test jig take a 9 volt battery and a meter with dc volt scale set up the meter just like you would test a 9v battery .with me so far ? now remove one lead from the battery and insert the diode between the battery and the test lead .......take a reading . now reverse the diode take a reading ........ i just tested a diode before writeing this and this is what i got my battey volts where 9.2 v whith the diode inserted i got 7volts . reversing it i got .02 volts dc . a diode is a one way valve and mine is good because it passed curent only one way ...yours should be about the same ....... if you understand this please leave me 4 stars ! i even went out in the shop and tested a diode for you just to make sure my answer was correct
SOURCE: how to connect to test amperage on a digital multimeter
go to www.actron.com click on digital multitester cp7677, scroll to bottom of page and download the user manual pdf file for detail amperage tests. The manual is free.
SOURCE: what do you set the digital multimeter on to test
One end of the device or the circuit must be isolated. You can read contiuity through a separate component.
Lou
SOURCE: The problem is power out
hi;
41 views
Usually answered in minutes!
David bryan add me on fb sunglasses n cig pic
×