SOURCE: 2002 HONDA SHADOW ACE 750 CARB
It sounds like you may have or will be jetting your carbs. I did this using the directions with the kit and used the Clyman manual for this bike to show me step by step how to remove the carborator. You will only need to attach 2 of the 4 hoses on your carb. syncronizer. If I remember right, you need to remove the bolt-on cooling fins to expose the engine block. The is a black screw or bolt that you take out and screw the threaded metal adapter of the sync tool. Be careful using the sync tool. Be very light on the throttle or the vacuum in the cylinder will **** in the mercury from the sync tool - not good. The problem you are stating on idle & backing off sometimes happens when the carbs are running rich (too much fuel) Hope that gets you in the right direction.
SOURCE: please anyonewhat is the compression ring size
What is it that you want to know? The diameter or the ring thickness? If you want the bore it is 79.0 mm or 3.100 inches.
Ride Safely, Ed
Testimonial: "was helpful thanks"
SOURCE: Should I adjust my valves? 1999 Honda Shadow Ace.
Well if its running good and you don't here any out of the ordinary rattling I wouldn't worry about it until at least 25,000-30,000 miles on the bike so probabley in another 10,000 miles or so have the valves adjusted unless you hear any unordinary rattling noises sooner then go in at that point and have them adjusted.
SOURCE: 1999 VT 750 CD Shadow A.C.E. Deluxe: I lost the keys to my 1999 honda shadow how do i g...
You can hot wire it, because you will not be able to steer it.
A Locksmith can fit keys for you.
!
If this was helpful, please post a nice review for City Lock in Boulder
Colorado listings on Google Maps, Yahoo etc. This listing will link you
to my website as well. On my website are resources for finding a
legitimate locksmith near you. Be sure you are hiring a REAL locksmith!
Thank You
Jeff
72 views
Usually answered in minutes!
×