Question about kawasaki Motorcycles
Hi, Alex if your headlight is not working, intermittent, only one beam works, keeps burning out, blinking, dim or surges from bright to dim to bright the first thing you need to check is the headlight bulb for damaged filaments then check your light circuit fuse, then check your headlight bulb socket ground wire for a clean tight connection, that being said the usual suspects are:
1. Faulty ground or power supply wire to the headlight bulb socket.
2. Worn down solder contacts or loose fit of the bulb base in the socket due to vibration.
3. Worn, chafed, or broken wires in the light circuit.
4. Corroded, broken, or loose pins/sockets in wire connectors.
5. Faulty hi/low beam switch.
6. Faulty ignition switch.
7. Fuse is good but no continuity on both sides.
8. Faulty headlight relay.
9. Faulty wiring between battery positive and headlight bulb socket.
10. Weak charging alternator/generator/lighting coil
11. Faulty voltage regulator/rectifier ground or overcharging.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Headlight doesn work KawiForums Kawasaki Motorcycle Forums
Kawasaki Ninja ZX 6R Service Manual
OEM Parts for Kawasaki
Kawasaki Ninja ZX 6R Owner Manual
Posted on Apr 16, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
well i would try the switch and see and if that doesnt work then check the wiring for a loose connection or ground or maybe it could be as ez as checking the light bulb it might be loose in the socket
Posted on May 26, 2009
sounds like a wire has been added the wrong way or wires have damage, switch could be the culprit. Does the kill switch work? I would be checking all wires and the conectors for heat damage (melting).And fuses for all circuts. if low beam is used does key work to stop engine?
Posted on Apr 04, 2010
SOURCE: i have a 2001 kawasaki
I dont think its the stator or regulator. If it gets brighter when you put the indicators on or apply the brake light, it sounds very much like the headlamp is using their return to earth. I know you have checked the grounds (earth), but often the grounds or earths are linked up within the loom.
Do you have a wiring diagram? If so, identify which is the earth return for the headlight and run a direct feed back to the battery negative. If this produces a bright light, you will know there is a problem in the loom.
You could just wire a new earth into the system or start cleaning all the little connectors.
Posted on Sep 15, 2010
Tips for a great answer:
May 21, 2017 | 2007 kawasaki Vulcan 500 LTD
Aug 31, 2014 | 2009 kawasaki Vulcan 1700 Nomad
Feb 04, 2014 | Harley Davidson XL Sportster 883...
Oct 03, 2013 | kawasaki Motorcycles
Dec 03, 2012 | 2007 kawasaki ER6f
Sep 09, 2012 | 2007 kawasaki Vulcan 900 Classic LT
Jun 17, 2012 | 2000 kawasaki ZX-9 R Ninja
Jan 06, 2018 | 2005 kawasaki ZZR 600 US
27 people viewed this question
Usually answered in minutes!