Question about 1993 Harley Davidson FLSTF Fat boy

1 Answer

1993 Harley Davidson FLSTF Fat Boy how to replace the starter

Replace n starter on 1993 Fat Boy, taking the oil tank out. @

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Harley Davidson Master
  • 53,281 Answers

Hi, Robert for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Harley, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at xlch@mail.com. Good luck and have a wonderful day.
https://www.hotbikeweb.com/starter-swap-with-basic-hand-tools
http://www.mediafire.com/file/br4waxbyxcya9zk/84+to+99+Harley+Softail+Service+Manual.pdf
http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
https://serviceinfo.harley-davidson.com/sip/vehicle/lookupForm
https://www.6ya.com/
to speak to me personally $6

Posted on Feb 07, 2019

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 22 Answers

SOURCE: oil come out the air cleaner

Too much crankcase pressure or the breather pipe is split/dosconnected. The crankcase breather goes into the rear of the air filter and the crankcase gasses are drawn in to the cylinder with the gas/air mixture and burned

Posted on Nov 10, 2008

  • 2712 Answers

SOURCE: oil come out the air cleaner

Too much crankcase pressure or the breather pipe is split/dosconnected. The crankcase breather goes into the rear of the air filter and the crankcase gasses are drawn in to the cylinder with the gas/air mixture and burned

Posted on Nov 20, 2008

SOURCE: How do I change the oil on a 2002 fat boy?

On the fatboy, the oil drain plug should be on the right side, just under the frame, directly below the oil tank. The primary drain is on the left side under the derby cover on the bottom. The tranny drain is on the bottom towards the rear pretty much centered.
And, as our darlin' little miss piglet said, a maual is worth the investment.

Posted on Jun 28, 2009

  • 5 Answers

SOURCE: how to change oil on 2002 fat boy

The drain plug is a hose that comes down to a sprung clamp on the frame behind the gear box on the right side of your bike. Remove from clamp then undo the screw-ring round the hose to allow the plug in the hose to be removed, take lid off oil tank and turn engine over a coupla times to clear engine oil into drainage tank. Replace plug- etc before refilling with half the oil, turn engine over coupla times then add remaining top up oil. Drainage for your primary oil is at the rear inside near the gasket joint and can be removed with a Hex spanner, taking the large outside cover off your primary with star drive sockets to allow airflow for drainage and then to pour new oil in through after replacing drainage plug in the bottom. Buy a Manual Mate, its worth it eh considering the value of your bike?

Posted on Jul 04, 2009

  • 58 Answers

SOURCE: where is the engine oil drain plug located on a

The oil drain plug is located on the right hand side below the swingarm.... Allen head if I remember correctly...

Posted on Sep 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Starter


Hi Anonymous, well you can start by disconecting your battery negative cable, draining the primary and removing the cover. Bend back the lock tab on the jackshaft bolt and remove by holding the pinion gear. Next remove all cables and wires connected to the starter. Remove the two starter bolts. You may or may not have remove oil tank mounts to raise it a little to get the starter to come out. Take your time, be patient, and keep your eye on the details. Good luck

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Apr 16, 2014 | 2005 Harley Davidson FLSTF - FLSTFI Fat...

1 Answer

How to change a starter drive on a 1995 herritage softail


Hi Anonymous, here is the short version: Disconnect battery ground cable, drain primary and remove primary cover, remove starter jack shaft bolt while holding the pinion gear, remove rear exhaust pipe, remove all wires, cables, and bracket from starter, remove the 2 starter bolts, now for the fun part, if the Harley Gods are wearing white suits you may be able to wiggle out starter while sticking out your tounge at a 37 degree angle, if they are wearing black well you might have to either loosen or remove some oil tank mounts to facilitate extraction. Good luck

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Apr 15, 2014 | 1993 Harley Davidson FLSTF Fat boy

1 Answer

2005 fat boy oil change


Stand the bike upright. Remove the dipstick from the oil tank. Remove the drain plug on the bottom right side of the frame. While the oil is draining, replace the oring on the drain plug. Remove and replace the oil filter, after filling the new filter half full of oil. Replace the drain plug. Put 3 quarts of oil in the oil tank. Replace the dipstick. Start the bike and check for leaks. No leaks, you're done! I use HD Syn 3 synthetic oil in my '04 Fatboy, but you can also use a conventional 20w50, as long as it's made for use in and air cooled motorcycle. Don't use car oil!

Nov 04, 2012 | 2003 Harley Davidson FLSTF Fat boy

1 Answer

How do I replace the starter on a 96 Harley Fatboy


Hi Anonymous, for more information about your question please visit the websites below. Good luck and have nice day.
2005 Harley Dyna FXDX starter replacement

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Jun 15, 2012 | 1993 Harley Davidson FLSTF Fat boy

1 Answer

2003 flstf starter installation


I assume that you want information on how to replace the starter on a Fat Boy. First, disconnect and remove the battery. Then drain the oil from the primary and remove the outer primary cover. Take the small bolt out of the starter jackshaft and remove the jackshaft. Then go to the right side of the bike and remove part or all of the exhaust system as necessary to gain access to the starter. Take the bolts and mounting hardware loose from the oil tank so that you can lift the tank slightly. You should not have to remove the oil lines. Take the battery cable loose from the starter and unplug the single wire at the solenoid part of the starter. Remove the two large socket head bolts that hold the starter on. When the starter comes off, there is a coupling that connects the starter with the jackshaft. Mark the direction it goes back in or make sure the counterbored end of the coupling goes towards the jackshaft. Reinstall the starter in reverse of these procedures.

Good Luck
Steve

Aug 03, 2011 | 2003 Harley Davidson FLSTF Fat boy

1 Answer

Can i boost my motorcycle with my 4 cylinder car?


Yes you can but anytime you jump start your bike with either another vehicle or one of those "booster" battery chargers, you are risking damaging the electronics on your bike with a voltage spike. I'd prefer to use a slow charge battery charger overnight to build the battery up to the point where it will start the bike. If the battery is over a year old on your Fat Boy, take it out and have it load tested. The Softail bikes are extremely rough on batteries due to the heat and vibration they are subjected to inside the horseshoe oil tank.

Good Luck
Steve

Jul 31, 2011 | 1993 Harley Davidson FLSTF Fat boy

2 Answers

How do i change my oil in my 1999 Harley fatboy


From the right side of your bike, look for a large hose coming out of the backside of the oil tank at it's lowest point. Follow the hose down behind the transmission on down to a clip on the lower tube of the frame behind the exhaust pipes. There is a metal plug in the hose. Simply take the hose out of the clip and reroute it below the frame. Remove the plug and the oil tank filler cap and the oil will drain out. Refill with three quarts of 20W50 oil.

Good Luck
Steve

Mar 12, 2011 | 1993 Harley Davidson FLSTF Fat boy

1 Answer

Need to find engine oil drain plug on 93 fatboy 1340


The engine oil drain plug is on the right side of the bike. Actually, it's a hose with a plug in it. Look just behind the chrome transmission clutch release cover on the right side of the bike. You'll see a large diameter hose that should be held to the frame by a clip with a metal plug in it. Just loosen the hose clamp and drain the oil from the tank. Remove the oil tank dip stick for faster drainage.

Jan 08, 2010 | 1993 Harley Davidson FLSTF Fat boy

1 Answer

How to change oil on 2002 fat boy


The drain plug is a hose that comes down to a sprung clamp on the frame behind the gear box on the right side of your bike. Remove from clamp then undo the screw-ring round the hose to allow the plug in the hose to be removed, take lid off oil tank and turn engine over a coupla times to clear engine oil into drainage tank. Replace plug- etc before refilling with half the oil, turn engine over coupla times then add remaining top up oil. Drainage for your primary oil is at the rear inside near the gasket joint and can be removed with a Hex spanner, taking the large outside cover off your primary with star drive sockets to allow airflow for drainage and then to pour new oil in through after replacing drainage plug in the bottom. Buy a Manual Mate, its worth it eh considering the value of your bike?

Jun 18, 2009 | 2003 Harley Davidson FLSTF Fat boy

5 Answers

Starter location


on the right side under the side cover. On the trans towards the back. You'll see a green wire attatched to it.

I’m happy to assist further over the phone at https://www.6ya.com/expert/robert_5bac37c3cb991fdb

Mar 25, 2009 | Harley Davidson Road Tech HA90 MP3 Player

Not finding what you are looking for?
1993 Harley Davidson FLSTF Fat boy Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Gar
Gar

Level 2 Expert

384 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

5809 Answers

Mike

Level 3 Expert

4356 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...