Pushing the key in and turning counter-clockwise opens the back compartment but not the seat.
SOURCE: I'm having a hard time pushing the caliper in and
Take the cap off your master cylinder...if it is not off it can hinder the fluid being pushed back into the reservoir. If it is the screw type use a large flat head screw driver or the toll made to screw it in....it should not be that hard. If it is the push type.....you can leave the caliper on the hub, also leave the pad on the piston, and use a flat head screw driver between the pad and rotor, pull the handle towards you prying the piston back into the caliper.
SOURCE: Manually close sunroof clockwise or counter clockwise '95 E320
Try it both ways and check , but do not apply too much pressure
SOURCE: Trunk stuck on a 03 Corolla
I was able to unlock my trunk by using a wood pole to operate the interior safety unlock handle, which is located just above the trunk floor, against the rear of the trunk lid. You simply insert the wood pole between your rear seats, while attempting to locate the handle release. When you find the handle, use the wood pole to push down on it.
Then, I had to take the top of the truck mat loose by using a flat head screwdriver to pry the plastic plug holders loose from the trunk. I also had to use a 10mm socket to loosen the trunk locking mechanism. Once inside, I notice the remote release cable ball had dislodged from its slot. I simply placed the ball in its slot and reassembled the trunk.
Problem solve. :)
608 views
Usually answered in minutes!
×