SOURCE: process of changing the rear brake pad on the
Remove the 2 break bolts that hold the break to the bracket. Remove the pin covers on the side. <2 flat heads> Remove the Alan key pins and old pads will come out. Use a c clamp and a rag to compress the caliper piston. replace break pads pins and pin covers. Re bolt the break to the bracket. pump breaks till stiff. open bleeder. pump twice and close during pump. clean up and enjoy ;D
SOURCE: Tyre pressure for 1996 kawasaki vulcan classic?
there should be a sticker under your seat or attached to the bottom of your seat with this info on it
SOURCE: crank fuse on 2005 vulcan classic
keep pressing the starter and find out were the click is comeing from,, then change the starter solenoid, it sounds like this is at fault
Testimonial: "Thanks will go back out and try that...then I just have find the starter solenoid...I'm no mechanic but trying to learn to do some of this myself..."
SOURCE: how do drain and add
If you don't know by looking at the service/workshop manual, take it to a specialist suspension place. You could do more harm than good.
71 views
Usually answered in minutes!
×