2007 street glide...headlight and brake light stopped working at the same time Blinkers work...tail light works..but no brake light @
SOURCE: 2001 dodge neon tail lights inop
looking at your schematics and , you say tail lights don't work , you didn't mention if front parking lights and license plate lights are working , they all come from the same source , a black /yellow wire , a good clue if front work and rear don't , please advise .if fronts work then you have a open circuit somewhere between junction S118 (near breakout for left headlamp) and rear sockets.
SOURCE: tail lights not working while drive. brake,blinkers work
i have a crown victoria with brake lights no tail lights could you help me?
SOURCE: No tail lights on 2007 pt cruiser
check the bulbs the filiments could be broke, do you have a third brake lightand is it working this will help rule out a brake switch
SOURCE: 2007 Ford Edge: Rear Blinkers/Brake Lights out; Not bulbs or fuse
Sounds like you need bulbs on both rear side lights. Does the blinker flassh really fast?
SOURCE: 2007 chevy silverado brake lights dont work
I had the same problem! I used a piece of wood to keep the break pedal depressed and then started to remove one of the break lamps and to my surprise it came on! Same thing on the other side. So I did not seat (bottom out) the lamps in their sockets and both break light are now working properly. I had a similar issue last spring but that time only one light was out. I put in a new bulb and it still did not work so I messed around with it a little more and it started working. Never did figure it out until now. Hope this helps!
272 views
Usually answered in minutes!
×