Question about 2013 Kymco Downtown 200i

1 Answer

2013 Kymco Downtown 200i loss of power

Im riding kymco 200i why when moving off my bike jerking n slowing down is it the battery, spark plug or my clutch pad is getting wear n tear? Anyone can help me answer this please @

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Kymco Master
  • 55,893 Answers

Hi, Adams and the usual suspects are:
1. Dirty or clogged air filter.
2. Faulty spark plug.
3. Bad Gas.
4. Improper oil level.
5. Improper chain adjustment and lubrication.
6. Low tire pressure.
7. Dirty or contaminated carburetor needs cleaning and tuning.
8. Clogged or faulty fuel pump or injectors.
9. Improper valve adjustment.
10. Slipping clutch.
11. Improper timing.
12. Low compression.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Help moped starts but has no take off power
scooter losing power under acceleration
KYMCO Downtown 200i Service Manual
http://kymco.com.mk/katalog_delovi/DOWNTOWN%20200i.pdf
KYMCO Downtown 200i Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Posted on May 11, 2018

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 29 Answers

SOURCE: Clutch

ok there is two solutions to this prob to consider first try the clutch cable adjustment. If that does nothing try The clutch springs inside the case. If there are wear marks on the clutch basket then you need to completely replace the clutch all together. let me know how you make out

Posted on Feb 04, 2009

  • 2 Answers

SOURCE: how to change spark plug on a 2008 kymco xciting 500

Remove the panel between your legs , with a screwdriver, Use the adapter found under the seat, you can locate the spark plug there, not to easy to see try with a torch first to locate it

Posted on Jun 10, 2009

  • 9 Answers

SOURCE: Clutch slipping

bad news. a goodly amount of 2004's came out of the factory with faulty clutches.. there's been several efforts by rebel owners to get a recall on them, but no luck so far. hope that's not what it is, but bear it in mind if you find your top speed dropping.

Posted on Jul 21, 2009

  • 376 Answers

SOURCE: Clutch vibration and jerking at slow speeds.

Check the drive belt. It probably has chunks missing or at least has flat spots (narrow spots) that cause the belt to jump every time it goes around a pulley. That will set up a heck of a vibration. Also check the pulleys for free movement. The drive belt is above the blade drive belt....

Posted on Jul 29, 2009

  • 11 Answers

SOURCE: I've got Yamaha Fazer 600. The engine cuts off

MAN ITS A MINOR PROB JST CHANGE THE SPEED OF COMBUSTION IT SHOULD BE 1 MIN AT UR RPM METER IN THE BIKE AND ITS PIN IS NEAR THE CARBURATER JST CHANGE IT AND ENJOY UR RIDE

Posted on Aug 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need a new engine for my 2014 Kymco Like 200i. What kinds of engines are compapatible?


Hi, Ronnie the answer to this question is way above my pay grade for this situation, I would call or visit my local dealer or reputable shop's service/parts department or eBay and inquire about any possible quick fix, answers, or parts inquiry.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Kymco Engine eBay
Motorcycle Engines Parts for KYMCO Like eBay
KYMCO Like 200i Scooter Online Service Manual Cyclepedia
Kymco LIKE 200 Parts
KYMCO Like 200i Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Jun 02, 2017 | Kymco Motorcycles

1 Answer

2012 Kymco Yager GT 200i oil change


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kymco, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
How to change the gear oil transmission oil on Kymco People GT 300i...
How to change the engine oil motor oil on Kymco People GT 300i scooter
KYMCO People GT 200i Service Manual
Kymco Scooter Parts ATVs Scooter Parts Performance Scooter Parts...
KYMCO Yager 200i Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e



Oct 10, 2014 | 2011 Kymco Yager GT 200i

2 Answers

1 have a 1997 Yamaha 600 r when I kick the bike to first gear it jerks forward and cuts off can any one plz Help and tell me wat that jerking is


when riding? if so then you maybe moving to fast for this gear to down shift and or you may have a bad spot on the gear

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/tom_db3a51ff0ca57f20

May 20, 2014 | Motorcycles

1 Answer

Kymco stryker 125 - new battery used a few times but not getting re charged while riding (indicators stop working, lights stop working)luckily its a kick start.not very up on bike stuff but if it was a car...


i had a semilar problem on my Kymco and i found that my fuse was not making proper contact.

what i did:the fuse im talking about is the small fuse in a "bottle" like cylinder in the positive power of the battery,the conection points in this little cylinder worn out and the fuse couldnt make contact any more i took the fuse out completely just linked the wires with lugs and my bike is working fine.

Sep 01, 2011 | 2005 Kymco Stryker 125

1 Answer

Clutch not engaging


could be a few different things,But always start with the small( inexpensive )first and work your way up...#1 check your clutch cable adjustment to be sure its engaging and disengaging properly(clutch cables stretch over time and need replaced or adjusted)...but if you have never done any clutch work to the bike(and you ride it like i do mine) #2. it probably needs new clutch plates and #3 maybe clutch basket from your description of the problem. the clutch plate fibers wear down over time(they are like brake pads and wear out).and the plates wear groves in the clutch basket and interfear with the plate movement...hopefully its just your cable..hope this helps..

Jul 30, 2010 | 2003 Suzuki RM 125

1 Answer

Car jerks when slowing down or stopped, CEL on


You said it all. When a car jerks it means it is not firing as expected which could be due to fuel pressure not adequate, air intake not enough or too much, sparks not been produce at the right time or engine management problems (sensors etc). from what you said i would start with locating the source of the oil consumption. If there is visible oil around the engine, this might not be cause of the jerking. If the oil leaks is not visible it could be due to cylinder\piston wear. Dirty air filter, spark plugs, plugged fuel filter and bad spark plug cable could also cause jerking so you might want to consider giving your car a tune up also

Dec 09, 2009 | 2001 Toyota Corolla

2 Answers

Bogging


Try fitting a new spark plug.

Jul 10, 2009 | 2002 KTM SX 125

4 Answers

No power on my Kymco Zing 125


your best try is to contact your dealer, and get them to order you the short red wire that runs from the + terminal on the battery, to the starter soleniod ( also has a thin red wire that runs to fuse holder) i had exactly the same problem and this solved it. i have however re done all the electrical connections on my bike using 7amp wire and bullet connectors, as i have had many faults with the electrics before.
My bike is a Kymco Cruiser 125 (almost exactly the same bike, i use kymco zing parts when replacing) i paid approx £16 GBP for the wire.

Mar 14, 2009 | Kymco Zing 125 Motorcycles

1 Answer

Clutch


ok there is two solutions to this prob to consider first try the clutch cable adjustment. If that does nothing try The clutch springs inside the case. If there are wear marks on the clutch basket then you need to completely replace the clutch all together. let me know how you make out

Jan 22, 2009 | 2002 Kymco Stryker 125

Not finding what you are looking for?
2013 Kymco Downtown 200i Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kymco Experts

Marvin
Marvin

Level 3 Expert

84625 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

5856 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Kymco Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...