Question about 1996 kawasaki VN 1500 Vulcan Classic
Where is the slave cylinder located at to bleed it on a 1996 Kawasaki 1500 classic @
Hi, Eloy for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
hydraulic clutch bleeding
How to bleed hydraulic clutch on motorcycle in an extreme case of air...
Kawasaki VN1500 Service Manual
OEM Parts for Kawasaki
1996 Kawasaki Vulcan 1500 Classic Owner Manual
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e
Posted on Feb 18, 2018
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
The clutch slave cylinder is located on the left side of the transmission, but i believe that the slave cylinder may come with the master cylinder and lines already attached
I’m happy to assist further over the phone at https://www.6ya.com/expert/jonathan_3a3c556b4b17d1d2
Posted on Aug 20, 2008
SOURCE: bleeding the slave cylinder
Best to get the help of a friend to pump the clutch pedal for you.
Take care with the brake fluid, as it removes paintwork !
Top up your clutch fluid reservoir, connect a bleeding tube to the nipple on your slave cylinder, and put the other end of tube in a container.
Get your friend to pump pedal 3 times, and then hold to the floor.
Open the nipple for 5 seconds or so, then close.
Repeat this about 6 to 8 times topping up the fluid as you go.
You should then find, that the air is out of your system, and your pedal is back to normal !
Good luck !
A FixYa rating would be nice.... Thank you ! John.
Posted on Feb 10, 2009
SOURCE: need to know how to bleed it
There would be a bleed nipple on it. It would be located near the bellhousing.
Open nipple a little let fluod seep out until no bubbles in it. Make sure you top the fluid up and dont let it empty.
Posted on May 04, 2009
the nipple sticks out side the bell housing on the left side just above your hydralic line for your clutch,auto zones web has a complete diagraham and steps for bleeding
Posted on May 09, 2009
work it back and forth with your hand and you will get pedal after a while then bleed like you would brakes get help so one can pump and the other can bleed
Posted on May 24, 2009
Tips for a great answer:
Feb 05, 2015 | 1996 kawasaki VN 1500 Vulcan Classic
May 22, 2014 | 2002 kawasaki VN 1500 Vulcan Classic
Jan 03, 2014 | 1996 kawasaki VN 1500 Vulcan Classic
Feb 21, 2013 | 1996 kawasaki VN 800 A Vulcan
Aug 06, 2012 | 1996 kawasaki VN 1500 Vulcan Classic
Jul 22, 2012 | 2002 kawasaki VN 1500 Vulcan Classic
Apr 23, 2011 | 1996 kawasaki VN 1500 Vulcan Classic
Jun 21, 2010 | 1996 kawasaki VN 1500 Vulcan Classic
May 15, 2010 | 1996 kawasaki VN 1500 Vulcan Classic
Jul 05, 2009 | 1996 kawasaki VN 1500 Vulcan Classic
167 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: