How to remove front side panel on 2014 Victory Vision Tour@

https://www.google.com/search?sa=X&source=univ&tbm=isch&q=victory+cross+country+radio+wiring+diagram&hl=en&ved=2ahUKEwixz9_Oo47pAhVJ8OAKHX0QDocQsAR6BAgJEAE&biw=1326&bih=627

http://www.carlsalter.com/motorcycle-manuals.asp

check with them on autos u need noise suppression plug wires don't know about cycles sometimes its the ground to the radio or the ant.

You have 2 things to look at first. 1, does it affect the warranty? 2 if you remove the BMW power connection, is the hole bigger or smaller that a lighter port? If you have no warranty issue than you can pull out the power port and you should see 2 wires. You HAVE to check to see which one is the hot. DO NOT GO BY COLOR OR LOOK TO SEE A GROUND. USE A LITE. Reason is I`m not familiar with BMW`s power set up, it could be a positive ground, that`s why you have to check. Simply cut and reconnect your wire to the new power outlet and using the same hole( you may need to ream it a little) put it in. The new outlet should have a clip for the back to hold it in place. I hope I helped you. Eddie

Not worth the extra weight or the time it takes and the space it takes up..why not go for a USB MP3 player ? cheap as chips and easy to fit and hold 5000 times more music

oil change my friend

check that the correct bulb is in the tail light, check the rear brake light switch is working properly, check that the front brake light switch is working....if all is correct, check that there is a fuse for the brake circuit.

In general, if the rear wheel alignment isn't just about perfect, the drive belt will squeal. The colder the weather, the more noticeable the squeal will be. With proper allignment, when the rear wheel is off the ground, if you rotate the wheel in the forward direction, the belt should slowly move from the outside edge of the rear drive sprocket to the inside edge. When you rotate the wheel in the reverse direction, the belt should slowly move from the inside edge toward the outside edge.

You may want to try a 'color match ' polish.Try your local Detail Shop to get the best suggestion as to what they use.