Virago 1100 wiring diagram

SOURCE: CDI help

You can't, just went through this. You'll need to find the correct CDI for your bike, some years will switch back an forth but rarely and Suzuki has never printed, that I've seen, a wiring diagram for the CDI. The 94 might work if you can find it and it should plug right in, the 98 will have a different curve that most likely wont.

SOURCE: need cdi wiring diagram for suzuki 900

hi m8,,give these guys a try,, www.repairmanual.com

SOURCE: 85 yamaha virago xv1000 are the coils & cdi igntor box interchang

YES

SOURCE: 1983 yamaha xj 650 no spark already changed the

• Do you see spark? If not, check the side stand kill switch. It kills the engine so that you don’t start out with the side stand down. If broken or out of adjustment, it would kill the spark. Check for a broken wire at the side stand switch and coupler. Try moving the side stand kill switch by hand. If that doesn’t work then wire a jumper around the switch to bypass it.
• Is the handlebar kill switch on? Is it shorted out?
• Are you getting power to the coils?
• Check the fuses. How good is the battery? Try a jump start from your car battery.
• Check the operation of the ignition switch and all kill switches with a volt ohmmeter. Check the wiring harness. Did a wire come unplugged? Are all wires clean and with solid connections? Any abraded or pinched wires? Is the bike in neutral and the neutral light is lit up? If no neutral light, check the neutral switch and neutral switch wire on center or side casing. If still no spark, get CDI system and coils checked at the dealers shop.

SOURCE: i need a wiring diagram for a honda cr 250 so i

Hi and welcome to FixYa,

On your posted need for the wiring diagram of a Honda CR250, would this help?

Good luck and thank you for asking FixYa.