Hi, got new cam chain tensioner for 2009 r1 14b, just wondering if there are any diagrams etc for fitting OEM for OEM
SOURCE: Chain
Locate the tensioner locknut on the right-hand cilinder (bottom): -keep the engine idling for about two or three minutes -loosen the locknut about two turnes while idling -the chain tensioner will slide into the proper position -tighten the locknut to secure the tensioner position and stop the engine -repeat every 3000km or 2000mls
SOURCE: 93 yamaha xj600 (seca II) cam chain tensioner relacement.
You can get a free pdf service manual on this site. I checked and they have yours.
http://www.carlsalter.com/motorcycle-manuals.asp
Please rate this solution. Four diamonds would be nice. Thanks!
SOURCE: HI i am trying to order OEM yamaha parts for my
Give the dealer the VIN number and they can tell you exactly what model you have.
Please take a moment to rate this answer. Thanks!
SOURCE: yamaha tt 600 re.removle of drive chain,fit new
just find the chain lock and take it off then take off also the engine spraket cover.
SOURCE: Hi have a yamaha fj1100 want to do the cam chain
Howdy: Depending on the year some FJs have a nut/screw at the bottom rear of the front cylinder. This can be adjusted and it works.
If the chain has not been adjusted in the past the nut/screw may be
stuck with gunk. Spray a little carb cleaner on the nut/screw and let set for a couple houres then try again. Get a manual for that year follow the "cam chain tensioner" procedure. I do not have enough lines to expain the proceedure. Good luck and ride safe - Doug
Testimonial: "cheers for the info"
400 views
Usually answered in minutes!
×