2005 kymco moongoose 250 won't start, replaced battery and starter solinoid i have lights but won't turn over.it will turn over if its jumped> ideas??

SOURCE: Starter or solinoid?

I never heard of a starter solonoid coming with shims. Did you replace the starter or starter solonoid?
What engine do you have?

SOURCE: My Transit starter will not turn over engine,have

you probably are going to need a new flywheel,check if you have the correct starter,for automatic or manual tranny,if the solenoide spin,but if you only get a click you may have bad engine

SOURCE: 2007 chevy cobalt ls won't

Ignition relay or fuse could be the problem. When you turn the key to start do you hear a fuel pump kicking on and or do you have spark when you hot wire the starter (I know it's hard to check while trying to start it)? You can email me back and I might be able to pinpoint it more.

Joe Taylor

• 2229 Answers
• Posted on Jun 12, 2011

SOURCE: My 2005 Yukon denali won't

My guess would be the anti theft security system. When this system starts to fail, it turns off the starter from the ignition. The fact that you can hard start it proves this. Read this link for symptoms, info, pictures, and solutions to this problem. http://vatspasslockpasskeysecurityhelp.yolasite.com/

maurice44o4

• 74 Answers
• Posted on Jan 27, 2012

SOURCE: I have a kymco agility 50 and it won't start. It has no power what so ever, the starter won't turn over and the break light won't light when I pull the break. I checked the kill switch.

Check with a multi tester for voltage coming through the ignition switch lead wires + to switch wire - to ground you shoul get 12volt or higher, with the switch off you should have one live (feed from battery ), on you should have 2 or 3 in and out feed (possibly 2 out one for ignition one for light curuit), or disconnect the switch and check for continuity (12v battery wire and a bulb if you dont have a multi tester between each pin on the switch plug when turned on you should get a curcuit when on.