Iv got an xs125 t13 barossa scooter 08 plate and cannot get an exhaust.! What other bikes can i use it off.? Thank u

google white pages and type in his name and town

2003 Honda Dylan SES 125 Scooter Engine ebay - YouTube

? 0:47
https://www.youtube.com/watch?v=DzAByfS2OAY
Nov 21, 2012 - Uploaded by TheShamefulsin
Short video demonstrating a 2003 honda dylans engine, that it starts and runs for the purpose of selling the ..

honda dylan in United Kingdom ' Motorbikes & Scooters for ...

https://www.gumtree.com/motorbikes-scooters/uk/honda+dylan

GumtreeMy 2003 Honda Dylan ses 125, unfortunately it was stolen from me, hence the .... uk plate GF07 XJK,bike has only few scratches, last time I could not start it, but ...

You may be able to contact MonsterScooter to see if they can obtain a manual or give you some knowledge as to where the wires attach.

It sounds like it might have the wrong exhaust or muffler. Check all clearances and any plastic parts that might be too close.

inlet 0.10 exhaust 0.10mm

i would recommend getting exhaust hangers checked at exhaust shop,sounds like exhaust is touching when it is in gear

You say that it did 70 after the belt was changed, this seems to indicate that the belt could be slipping. Either replace the belt again or get hold of some belt dressing which makes the belt grip better in the pulleys. Another thing to look for is a blocked exhaust port and muffler box plus look at your air filter to see if it is not perhaps restricting inlet air flow.

Hello,

Yes, your carbs will have to be tuned to your exhaust - this, usually, means upgrading the needles/seats in your carbs. I bought a Cobra exhaust system for my Suzuki (earlier model) and it came with the upgrade kit for my carbs.

Some people are happy adjusting the jets out further and living with poor fuel mileage, fouling plugs and lousy performance.

Do some research by calling your parts dealer and ask them if they have the carb kit for the exhaust you are wanting to buy. I use one of two online dealers; Bike Bandit or Old Bike Barn

Hope this helps. If you find this information useful, please vote on this post. Thank you.

Regards,

Oz

Clutch plates wiuld affect all gears.The type of oil in the enine affects the plates. .Make sure you the clutch is not hanging up and has free play on lever when clutch is engaged. It should be slipping bad. ckeck clutch lever on yhe engine for full release and free play.. good luck

you can order from vento by registring an have it ship to you

24701J01F000 PLATE,DRIVEN $7.03