How can I remove the transmit frequency restrictions on icom IC-F700 radio

Send it in for repair. It is broken

https://www.google.com/search?q=Icom+ic-210e

You have to modify this radio to operate outside of the HAM bands. You will likely find the modification at www.mods.dk. This is a pretty common and easy modification for HAM radios. Your performance may not be as good as in the HAM bands.

You do this MOD at your own risk. If you are not licensed for operation on ANY frequency or band, you are not legally allowed to transmit. Heavy fines may be levied against you.

The IC-T8E is the Icom VHF / UHF Amateur (or "Ham") transceiver capable of wide-band AM & FM receive and 6 meter (50Mhz - 54Mhz) , 2 (144Mhz - 148Mhz) meter and 70 centimeter (430Mhz - 450Mhz) FM only transmit - when appropriately licensed by your country's communications authority.



RigPix Database Icom IC T8E



Any FM transmitter operating in those frequency ranges will be received and played thru the speaker - unless they are encoded with a squelch decode sub-audible tone or digitally encoded squelch control that does not match the one set to the IC-T8E. Program the squelch to be open or to match that of the transmitter so that the radio will play only when that particular transmitter is transmitting.



An FM transmitter operating in APCO25, DSTAR, etc. will not be decoded as these are digital signals that the ICT82 is not capable of decoding.



I was unable to locate any "BP200" radio you mentioned, so I can't comment on their capabilities or if they have an incompatibility in encoding, frequency, etc.

check the rear antenna connection there are 2

check RX/TX frequency must be same, also check QT/DQT, this option at both radio must be same or disable.

This is a HF, VHF and UHF transceiver.
All of the specification are at:
http://www.icomamerica.com/en/products/amateur/hf/7100/specifications.aspx

Great advice, Robert.

Peter

upon what frequency are you trying to transmit?

Perhaps the radio is blocked from trying to TX on said frequency.

It's a frequency error. It can be corrected, just give me some time, I need to figure something out first. It might take me a day or two.