I can't locate the starter
SOURCE: Any way to adjust the rear shocks on a 1996 vulcan 1500-a10 ?
dear susan shock adjustment for the rear shock are done with c wrench. you will notice at the top of the shocks there is a ring with 3 adjustment cams. the wrench is placed in the two holes you see on the shock opposite each other this is where the wrench fits you simply turn either direction for softer or harder ride. this adjustment puts more or less tension on the spring. i own a 96 vulcan as well hope this will help you jim
SOURCE: confused about wiring a tach on my '05 Kawasaki Vulcan 1500
go to gadgets fix it page, they have diagrams and step by step instructions to do this, i use his site religiously you can find anything there about your vulcan
SOURCE: what are the correct spark plugs to run in a 2001 Vulcan 1500
NGK are the best plugs to run in a Kawasaki. For gaping instructions contact a dealer.
SOURCE: Vulcan 1500 classic starter
very simple to replace only 2 wires i believe they r just tight to get to and usually in a bad spot and just usually 2 or 3 bolts and it drops when u pull iy off look and see if the gears inside looksgood and not wore out
SOURCE: will a 2008 nomad 1600 fuel tank fit my 1993 vulcan 1500
I have a 99 nomad and found a tank that is bigger to fit but they wanted 800 american for it. found an add on from a place called tour buddy.com for 200 with all the fittings. fits on the back where the luggage rack goes. 4.5 gallons. I love it.
119 views
Usually answered in minutes!
×