At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Ther is a bolt that adjusts the tension near the rear othe the bar, back it off , jack it up under the frame , not the a arm , put jack stand under frame , then jack under a arm , remove bottom shock bolt and ball jioint nut , separate , you may have to unhook sway barl link let arm down replace torsion Barr reassemble and adjust tension with adjustment bolt
1) No start after disconnecting battery could be the Security system going into tamper mode. Perform the reset procedure. key to start, wait, etc. There are videos. This might fix it all. If you still have trouble with the key being stuck (another flag for the tamper lockout theory.) replace the lock cylinder and key. Remember to reset procedure.
2) trans shifter has a lockout solenoid that is controlled by a switch at the brake pedal. Could be tamper lockout. Taken with the brake lights and windows and locks I would then look for a common 12V source, ie fuse, relay, fusible link. Fix one might fix them all. The brake lights and the shifter lockout for example converge at the brake pedal switches. Not likely the brake bulbs coincidentally burned out, but possible. The Electronic troubleshooting manual used to be called EVTM Electric and Vacuum Troubleshooting Manual for your model is the best resource for finding wiring diagrams and locations of fuses, relays, connectors.
Pull the key out of the plug or key switch. There is a freewheel/brake release lever sticking out of the top or back of your scooter on the driver's right hand side. Push this handle the opposite way it is now and try the scooter. If this does not work, repeat the steps above. It is important to do this with the key out of the unit or it will not reset.
Sounds like you have a vacuum leak,around your new manifold or carburetor. No the timing will not be different between a two barrel or a four barrel carburetor.
the first suspect is the igniton switch. when this happens, take the ign key and just barlely turn it, either way, not enough to go off/on just a little tweak, it the lights come back on or flicker, that ign switch will need replacement.
It sounds like yout lcd inverter is blown. You can usually get a new one and replace it yourself. I would look on ebay. Its just a small computer chip that fits inside of the monitor housing.
×