2006 Gilera Runner VX 125 Logo

Related Topics:

Jodie Smith Posted on Apr 05, 2015

2006 Gilera Runner VX 125 cylinder head torque specs

Cylinder head torque setting for Gilera VX125 @

5 Related Answers

Anonymous

  • 75 Answers
  • Posted on Dec 08, 2008

SOURCE: my gilera runner 125 vx

put choke and start the bike in the morning

Ad

1400Slugg

  • 260 Answers
  • Posted on Jan 04, 2009

SOURCE: Need torque wrench settings for cylinder head bolts

try here http://www.manualz.info/

hope this helps

Anonymous

  • 149 Answers
  • Posted on Jan 31, 2009

SOURCE: power failure

if the engine is dieing, check that the spark plug has a cap that is sealed eg rubber boot around it.
if the revs are still there but the bike slows the trans belt is getting water in it check the trans gasket for sealing.

Anonymous

  • 1 Answer
  • Posted on Feb 19, 2009

SOURCE: gilera runner vx 125 oil change?

Its the really big bolt on the right hand side

Anonymous

  • 292 Answers
  • Posted on Apr 11, 2009

SOURCE: starting problems with gilera dna 50cc scooter

no, if it starts on the kicker petrol is not an issue, could be battery though

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My son has a Gilera DNA125. He has a big problem of water entering the oil tank. We have changed the head gasket and the bottom cylinder gasket but this has not solved the problem. Do you any idea what it...

Although Im not familier with these bikes, find out where the water pump is and change the gaskets/seals for this. The pump is usual mechanically driven by the engine, and will have a seal to stop the oil/water mixing. Its a common problem with Yamahas liqued cooled RD bikes.
1helpful
1answer

Too much oil running very badly

r u runnin the rite oil-use sae 40 cause u hav valve guide n ring wear--gonna need to do a 'top end'-take cylinder off n recondition or replace these parts-git a repair manual-u may like to do it urself
3helpful
2answers

Where to put engine oil ? when to put in coolant and how much . i have just bought the bike second hand, but has no manual

hi if its a 4stroke 125..(not a 2stroke...)...lets say its the 125 4stroke engine...as you are sat on the scooter. the left hand side of the engine(not the exhaust side thats.right side as sat on scooter)..so left hand side of engine...below the air filtter box is a metal cover which as the drive belt in it!!..to the front of cover there is a dip stick..unscrew it & you can check the oil level & this is all so were you put the engine oil in......hope this helps!!
0helpful
2answers

My gilera runner vx125 2008 front lights when on full beam olly one light lights up is this ok

Sometimeds it's like this: left is normal beam and right is high beam or similar...
so in that case it might look like it's failing,
otherwise check your fuses, check the wiring, check the lightbulb....

I hope this is helpful, and greetings,

Olivier.
2helpful
1answer

How do you fit the clutch on a gilera GSM 50cc ?

my gilera vx125 is in constant drive whilst on tickover ,any ideas
0helpful
1answer

What gap should i set my new spark plug before i

the plug gap should aleady be set from manufaturer, but incase you think its been dropped or something, the gap should be at 1.1mm
1helpful
1answer

Rear wheel setup vx 125 07

c34b1f2.jpg so is it ok and do u understand
0helpful
1answer

My 2007 gilera runner vx125 will not start if it gets wet

i had the same problem try changin u spark plug cap to one witch has a water seal
Not finding what you are looking for?

244 views

Ask a Question

Usually answered in minutes!

Top Gilera Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66957 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Gilera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...