- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Aug 20, 2010 - Uploaded by mrmaxstorey
I have a 2005 Kawasaki Ninja I'm trying to hotwire does this method .... Do you have any suggestions on how to unlock/"on" the ignition on a ..
TO ALL VN1500 OWNERS....This once happen to me, I went to the garage to start the bike "Nothing ""The first thing is the lights are bright but no turning over,Next you think the solenoid is kaput but the answer was very simple and the fix takes 30 seconds.. Do not take the bike to bits looking for other problems and look at the clutch leaver and you will see some wires going into a plastic shroud going into the switch in the clutch leaver, Make sure this has not popped out if its connection as it some times may do after a few years due to constant turning on the handlebars, When this is not connected you will have a bike that will not fire up but comes alive and you will hear a clicking noise but this is from the engine carb area and every function of the bike will work but it will not turn over, Worth looking at and saves sixteen quid for a starter unit you never needed.
The stock plug was an NGK-DPR6EA9. However, some bikes had NGK-DPR5EA9 as stock. I would start with the ...6EA9 and then go to the ...5EA9 if a hotter plug is needed.
×