My suzuki ozark 250 won't accelerate after it warms.What could be the problem?It runs fine,but won't accelerate.

SOURCE: 2005 suzuki ozark 250 sat a long time and wouldn't

i would have a look at the float needle and make sure its not sticking could cause the overflow of fuel

mxtras

• 194 Answers
• Posted on Oct 15, 2009

SOURCE: tried to adjust mixture screw like you said and it

The likely problem is either a sticky float or a problem with the needle and seat.

The remedy is to remove the carb and pull the bowl for cleaning and inspection.

SOURCE: 2004 250 suzuki ozark quad will not run w/o choke

needs the carb cleaned out.

SOURCE: Need to find out the clutch disc spec's for a 03 suzuki orzak 250

the easy way to find out if the cluch is slipping is to ride the bike in top gear pull in the cluch rev the bike up to high revs and drop the cluch if the engine dont drop in revs very fast and the revs only drop slowly its slipping if this happens check that you have a small amount of slack in the cluck cabel ie: 1/4 of an inch is ok if its to tight it will cause the cluch to slip as the engine warms up

SOURCE: I have a 2005 Suzuki Ozark 250 ATV. When it is

Sounds like the float is stuck open. Try taking carb out and cleaning all the parts.