Probably sitting in China somewhere. Seriously, if this scooter is aspirated, it will be on the carburetor. Don't expect much reliability from any Chinese motorscooter or motorcycle. They're basically junk when the leave the factory!
SOURCE: dead battery
Steve when you store a vehicle it is best to use a trickle charger to maintain the battery.
Buckyrain, I believe your problem can be solved by replacing the charging fuse next to the battery. It is not with the other fuses. If you pull the battery out it should be on the left with a plastic cover thing over it. Follow the power line and it will be along that.
SOURCE: Battery size (volts) gas to oil mixture
12V battery 40:1 to 50:1 two-stroke ratio, but you shouldn't need to worry about that - it has automatic two-stroke injection.
SOURCE: where is the air/fuel mixture scrue?
i'm not too familiar with dirtbikes but my experience with street bikes it has been on the underside of the carbs and if stock it is typically covered by a brass plug. this plug is just there to satisfy the epa you need to drill it out but be careful the screw is directly underneath the plug so as soon as you break thru pull back then use a screw to extract the plug. hope this is the answer you are looking for.
125 views
Usually answered in minutes!
×