I have 2007 zx10r,,,F1 light is on and red light as well as its making funny noise under air box like paper printing out of a printer,,,

The light will be FI for fuel injection, it is the equivalent of a check engine light on a car. Take the bike in for a service so the tech can download the fault codes.

Try:

• The printer makes strange noises, or is noisy during printing
• How do I reduce noise in my printed photos?
• "The selected paper size is not supported by your printer..." appears after selecting the Paper Size in the printer driver.

My C60 Epson Stylus printer is not printing. First of all the paper jammed, I pull the paper from the front and since then the catridge holder is not going to the middle to print. also the green light keepon flashing and the red light stays on. I need your help.

this could be the printer needs to be reset

try on pressing start buttom for 1 min to reset the machine.
it should be working fine after that.

Time to change the paper pick rollers located in the tray, above the tray on an arm, or any combination of these locations.

try to make sure that the paper is printer paper

grinding is NOT cool...i'd say that you have a mechanism issue with this printer. How long have you know this printer?

I've been stuck with a flashing red paper light for a while. The printer could print from the manual tray and could also print test or diagnostic pages.
So I thought it might be driver related, and indeed it was.
There's a nasty setting in the printer properties that makes the printer go woo-hoo. So go to printer properties > tray settings. Check the "paper size" of "Tray 1". If it's set to "undefined", change it to your corresponding paper format. Click Update, Apply. Now print happily.
I still wonder why that setting magically changed. Hope this helps someone.