A single bolt with a cotter pin holds the rear wheel on the axle, covered with a plastic dust cap. Remove the cap, Remove the pin, then use a pry bar to hold the wheel in place while you undo the axle nut. Once removed, tap the end of the axle with a rubber mallet or use a piece of wood and a hammer until the wheel comes loose. Remove, use motorcycle tire tools to remove tire, replace tire, and remount wheel. Use a new cotter pin.
SOURCE: what can make a 50 cc roketa scooter not get any
If it just die on you changes are;
Faulty spark plug.
Blown fuse.
CDI box is shot, Knock offs are about 25 to 30 bucks
Hope this helps you out.
SOURCE: My ANF Innova 125 cc 2007 has a Flat tire! Need to
Keeping all of the parts together, making sure the chain is tight when you put the rim back on, adding enough air to pop the bead back into place. thats about it
SOURCE: 50 cc chinese scooter moped
my sukida qt 50 doesnt have a spark, yet iv changed the spark plug ht lead, cdi ,n starter relay but still dont hav a spark
SOURCE: there is no spark my scooter wont start what's
The problem may be the accumulator (battery). If you don't have a kicker, try changing the battery
SOURCE: What oil (4 or 2 stroke) oil for 50 cc CPI scooter
Model: CPI Oliver 50
Displacement: 50.00 ccm (3.05 cubic inches)
Engine type: Single cylinder, two-stroke
Power: 4.40 HP (3.2 kW))
You have to use 2 stroke engine oil.
Hope it helps.
Testimonial: "Thanks Guru..2 stroke oil was my thought also...appreciate your response! Great! "
228 views
Usually answered in minutes!
×