I had it running and it died and went and try to start it up and want start
SOURCE: 2006 Honda vtx 1300 back fireing
Since you removed all of the back pressure,You will need to have the carb and timing adjusted to match the new exhaust flow
SOURCE: 2005 vtx 1300 wont start and has no headlight
Check regulator...this powers all running light tail lights etc.
SOURCE: 07 vtx 1300 leaking gas when bike is started
You need to pull the gas tank off and find out where it is leaking. I would say it is probaby something simple like a loose clamp on a fuel line.
Testimonial: "thanks. It was exactly what you thought. I took the tank off, the main pipe that goes from tank to the carb had come off. Put it back on and walah."
SOURCE: '06 vtx 1300 c : engine dies when put into gear
You have one of two things going on. (1) You need to check the kick stand switch, your bike thinks the kick stand is still down. It may have been loosened out of adjustment by vibration. If the kick stand switch is out of whack, it will restart as long as the clutch in pulled in. But as soon as you try to let out the clutch it will kill the engine, if it is in gear. (2) Next problem could be, you need to loosen up the clutch cable a little bit, The clutch control on the handle bar has a screw type of adjuster (clutch cable passes through it ), try loosening it till it's easy for you to move the bike without the engine shutting off. Hope it helps and comment if you need more clarification.
Testimonial: "I tightened the kickstand switch and it did the trick. I had some bad thought about my Honda and now feel grateful. Thanks alot, really!"
295 views
Usually answered in minutes!
×