Question about 2011 kawasaki Vulcan 1700 Voyager

1 Answer

2011 Kawasaki Vulcan 1700 Voyager FI light on

2011 voyager, ERROR message and F!or FI are displayed. bike loses power and torque while riding, in any gear, when not throttling up the display reads, "ERROR" and an F1 or FI. Bike loses power and torque and feel like only half the engine is giving power @

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • kawasaki Master
  • 58,590 Answers

Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
FI light on with friends bike
Kawasaki Fault Codes
Kawasaki Vulcan 1700 Voyager ABS Service Manual
OEM Parts for Kawasaki
Kawasaki Vulcan 1700 Voyager Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Posted on Jan 19, 2018

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 125 Answers

SOURCE: my ninja loses power in the wind

Do you have a "RAM AIR" system on that bike, if so that may be what happens when you ride into a headwind. The bike may be running a little lean and with the extra intake pressure goes too lean.

Posted on Jun 16, 2009

  • 15 Answers

SOURCE: FI LIGHT COMES ON AND LOSES POWER THEN IT SHUTS OFF THEN FINE

It could need the ECU software updated, some manufactures are still screwing up they're fuel injection, the dealership should do free of charge. Failing that it could be something as simple as dirt in the injectors which should work itself free in time. Cant see it being something major on such a new bike, as I said contact your dealership to see if there's an update.

Posted on Jul 16, 2009

samadhan_law
  • 54 Answers

SOURCE: My bike seems to be ok but when im riding it you

if u r bike new purchased so go to u r service center and tell them about that problem

and

if it is old so service it means use both options
tune up & carburetor clean both

and after service it every two weeks it will be fine after that

Posted on Jul 25, 2009

  • 11 Answers

SOURCE: 93 gsxr 750. engine dies after riding a few miles

Your petcock could be bad try a pingel for a sure fix. Also check your vent on top of the gas tank, they become clogged a small piece of wire will clear it be sure you can **** air out of it. Unless your problem is electrical these may fix the problem.

Posted on Sep 19, 2009

vetteman3002
  • 2299 Answers

SOURCE: At 3500 rpm my throttle

There is a electrical connection on the secondaries of the fuel system. Try unplugging this connector. And see if the bike runs normal then.

Posted on Nov 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When riding my 2011 Yamaha grizzly 700 about 1/2 throttle it shuts down and when I get in water or mud it like it loses power what would it be


Hi Curtis:
Considering the age of the machine I'd be looking at basic maintenance first. Things like air filter, fuel filter, carb condition, spark plugs, oil and oil filter change. Then start thinking about valve condition and clearances.

Jul 09, 2016 | Yamaha 2011 Grizzly 700 FI Auto 4x4 EPS...

1 Answer

I have a 1986 honda prelude2,0si pgm-fi programed fuel injection 12valve.my car in allgears starts bogging out,towards the end of gears.


1985 Vf750F - Bogs Down On Throttle - Maintenance Questions - VFR ...

www.vfrdiscussion.com > ... > Maintenance Questions

Jan 22, 2014 - 10 posts - ‎4 authors
Page 1 of 2 - 1985 Vf750F - Bogs Down On Throttle - posted in Maintenance Questions: Greetings VF braintrust! I have a 1985 VF750F which I ...

Honda Spree and Elite 50 Forums • View topic - 1986 honda spree ...

www.hondaspree.net/phpBB3/viewtopic.php?f=3&t=18521

Apr 9, 2011 - 12 posts - ‎4 authors
Hi all I am new to thie forum. I recently bought a used rebuild Honda Spree. The guy I bought it from ran super unleaded in it and mixes klotz ...

250 bogging down under full throttle. - Honda Rebel Forum


Dec 02, 2015 | Power Flow 1986 - 2001 Honda Prelude Mud...

1 Answer

Reduce power light on has no throttle and keeps giving throttle accuator cdes


2003 Silverado 2500HD REDUCED ENGINE POWER - Discussion on Topix

www.topix.com > Top Stories
Dec 28, 2009 - 20 posts - ‎12 authors I have replaced the throttle body, had the wires re-connected and .... The gauges all went wild and reduced engine power displayed on the dash. I looked it .... The truck just went to idle for no reason and it keeps happening. 2003 Chevy Trailblazer-CHECK ENGINE LIGHT AND ...
Dec 23, 2011
Reduced Engine Power message
Jul 29, 2008
2003 Chevrolet Silverado - Reduced Engine Power
Nov 3, 2007
Trailblazer - Reducted Engine Power
Aug 3, 2006
More results from www.topix.com

Reduced Engine Power Message Displayed on GM Vehicles

www.underhoodservice.com/tech-tip-reduced-engine-power-message-dis...
Dec 10, 2012 - Tech Tip: Reduced Engine Power Message Displayed on GM Vehicles ... Model year 2008-'10 vehicles must have the engine control module (ECM) reprogrammed ... Do not drop the electronic throttle control components.

Oct 28, 2015 | Cars & Trucks

1 Answer

I have a 2003 Suzuki TL1000R. It was running fine, then I stopped for gas. When I tried to start it, it would only turn over slowly, but would not fire, and the little F1 light came on. Help??


Open your rear seat and you'll see a black cap covering a connector/harness on the left side of the seat. If you take the cap off, you'll see it appears to be a normal harness. With your key in the ignition and bike turned to "on" (but not running), take a paperclip and short the two connectors out (by touching the two contacts together). This is known as a "ghetto dealer mode switch". It should display the error code on your display instead of just FI now.



Fuel Injection (FI) Code List:

C14 - THROTTLE POSITION SENSOR
C15 - ENGINE COOLANT TEMPERATURE SENSOR
C21 - INTAKE AIR TEMPERATURE SENSOR
C22 - ATMOSPHERIC PRESSURE SENSOR
C23 - TIPOVER SENSOR
C24 - IGNITION SIGNAL #1
C25 - IGNITION SIGNAL #2
C26 - IGNITION SIGNAL #3
C27 - IGNITION SIGNAL #4
C28 - SECONDARY THROTTLE VALVE ACTUATOR
C29 - SECONDARY THROTTLE POSITION SENSOR
C30 - SECONDARY THROTTLE CONTROL UNIT
C31 - GEAR POSITION SENSOR
C32 - INJECTOR SIGNAL #1
C33 - INJECTOR SIGNAL #2
C34 - INJECTOR SIGNAL #3
C35 - INJECTOR SIGNAL #4
C41 - FUEL PUMP CONTROL SYSTEM
C42 - IGNITION SWITCH SIGNAL
C46 - EXHAUST CONTROL VALVE ACTUATOR (1000 ONLY)

Jul 11, 2014 | 2003 Suzuki TL 1000 R

1 Answer

Not satify in cilimbing up in slope on double load


Two reasons...1) either you are riding with the pillion on a higher gear instead of the lower gears which are capable of pulling up.
TIP: Always : prefer lower gears appropriate to the bikes momentum while climbing slopes.. If you are at the top gear, chances are you will burn out your bike's clutch plates.
2) Pickup of your bike depends on your bike's clutch plates. If the clutch plates have gone faulty, then you have all the chances of losing the momentum over your bike..
I'm pretty sure if you take care of your bike well, it would take care of you as well. - Cheers

Oct 11, 2013 | 2011 Bajaj Pulsar 180

1 Answer

Suzuki gsxr-1000 2011 exhaust valve actuator fi fault


You can definitely ride it without the servo, all 3 of my bikes have the FI lights on as I have aftermarket pipes with the servos disconnected. But I would make sure the servo is open, you'll lose a little low end power, but you won't sacrifice any top end.

Jul 10, 2013 | Motorcycles

2 Answers

I have a 2004 gxsr 1000 with fault code c42. It wont start. oil light is flashing and displays FI on the temp. Bike just crank but will not fire it up. Help?


Grab a paperclip.

Place the bike in Neutral, and take the rear seat cowling off. On the side of the bike between the tail section and the trunk you will find a connector that is covered by a rubber cap, and has two wires running into it. Remove the cap and take note of which one of the 4 sockets the two wires go to. Turn the bike ON and start it up, short the wires out with the paperclip. Where your speedo was flashing a -CHEC- with the temp should now be a CXX error code. Write this code down. Then shut the bike off. Match the code up with the list below. Grab a Manual and get to work!

(What you have just done is put the bike into "Dealer Mode".

GSXR Fuel Injection (FI) Code List:

C14 - THROTTLE POSITION SENSOR
C15 - ENGINE COOLANT TEMPERATURE SENSOR
C21 - INTAKE AIR TEMPERATURE SENSOR
C22 - ATMOSPHERIC PRESSURE SENSOR
C23 - TIPOVER SENSOR
C24 - IGNITION SIGNAL #1
C25 - IGNITION SIGNAL #2
C26 - IGNITION SIGNAL #3
C27 - IGNITION SIGNAL #4
C28 - SECONDARY THROTTLE VALVE ACTUATOR
C29 - SECONDARY THROTTLE POSITION SENSOR
C30 - SECONDARY THROTTLE CONTROL UNIT
C31 - GEAR POSITION SENSOR
C32 - INJECTOR SIGNAL #1
C33 - INJECTOR SIGNAL #2
C34 - INJECTOR SIGNAL #3
C35 - INJECTOR SIGNAL #4
C41 - FUEL PUMP CONTROL SYSTEM
C42 - IGNITION SWITCH SIGNAL
C46 - EXHAUST CONTROL VALVE ACTUATOR (1000 ONLY)

03-04 GSXR1000 Workshop Manual Verify Download

Sep 26, 2012 | 2004 Suzuki GSX-R 1000

1 Answer

Hi i have an aprilia sx 125 it is a 2010 model and i bought it a few weeks ago it came with the warranty book but no service stamps in it. My problem is that when running the bike mainly in 4th gear at...


Hi, Dunhills and the usual suspects are:
1. Extremely lean fuel mixture.
2. Dirt, rust, water, or ethanol sludge in the fuel system.
3. Sticky throttle cables.
4. Multiple carburetors not in synchronization.
5. TPS sensor out of adjustment or faulty.
6. Wrong spark plugs for the type of service.
7. Throttle bodies not in synchronization (FI)
8. Faulty O2 sensor.
9. Clogged, stuck, or faulty IAC valve.
10. Aftermarket components not compatible with ECM.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
2 Smoke questions
http://www.performanceforums.com/forums/archive/index.php/t-67251327.html
APRILIA RS 125 Workshop Manual
Products at Aprilia Genuine Parts Aprilia Parts Aprilia Spare Parts...
http://mybikemanuals.com/aprilla/2010-aprilia-owners-manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

May 09, 2017 | 2008 Aprilia SX 125

Not finding what you are looking for?
2011 kawasaki Vulcan 1700 Voyager Logo

Related Topics:

248 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5948 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

ROB

Level 3 Expert

858 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...