Choke switch wont move runing very rough over black plugs
Anything is worth a try;
go by your local wal-mart and pick up CLR. pour it in a container.
heat it above luke warm,take carb loose from manifold.and submerge it for a couple of hours.you should be able to wiggle it out.
PS if it dont repeat proccess.
SOURCE: john deere LT180 runs rough and must use the choke to stay runing, what should I do?
remove the carb take it apart and soak in in carb cleaner for 24 to 36hrs clean out all the passages and that should do it
SOURCE: 2005 gmc envoy runing rough po302 i replace plugs and "2 coil now po300 runs rough
have you replaced the fuel filter. also check the battery new cars use a lot of power and that could cause a random misfire code. if those are all good then check for a vacumm leak. you can do that with carb cleaner by running the vehicle and spraying around the intake manifold or vacumm lines and listen for a change in the motor
171 views
Usually answered in minutes!
×