- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
When adjusting the fork oil level, compress the outer tube fully
without the fork spring.
? 09943-74111: Front fork oil level gauge
? Fork oil level (Standard): 124 mm (4.88 in)
? 99000-99001-SS5:SUZUKI FORK OIL SS-05
? Standard fork oil capacity (each leg): 351 ml
or an equivalent fork oil
(11.86/12.36 US/lmp oz
Hi depending on the condition of the engine components such as seals crank bearings head gasket etc. Start with cheacking the carb for water/dirt in the carb of stale fuel if the motorcycle has been sitting for some time because old gas will clog the slow speed circuit in the carb.
Stick in a new spark plug then remove the float bowl on the carb and clean the carb. Chances are the main jet is plugged up with a bit of trash. Below is a diagram of your carb. Please rate my answer. Thanks.
hi buddy set the needle clip to its normal condition and also on the carb is the mixture screw you need to turn this all the way in and out 1 turns and try this you will always get a bog if you rev fully too quick i had this problem with my kx85 and it was just this hope this helped mate i will send the pic in a mo
×