Isuzu 1999 v6 engine 3.2 DOHC cylinder head tensions
Wow , no car body stated, so all online FSM , cant look it up.
as they ask year, body first. or you get nothing..
did your read the FSM first?
seems not.
are they TTY bolts, ? the book says, so. and would be question one
some are not set with torque, but are set by turns angles.
if not TTY bolts (torque to yield)
do you think 15 year old bolts are still good. Id bet not.
those are the first 2 questions, on all cars this old.
at random i picked trooper. and it had a 3.2 option and the
head torque is
Step 1: 21 ft. lbs.
Step 2: 47 ft. lbs.
on the head page the first line reads
"Use new head bolts when installing the cylinder head."
doesnt say way, only that.... you can google the why
or join a real isuzu form and ask, THEY KNOW.
and use the L marked gasket on left bank.
SOURCE: cylinder head torque settings 1990 2.6L isuzu motor
From front to back is this:
7 3 1 5 9
8 4 2 6 10
First torque value is 58 ft lbs.....then final torgue is 72 ft lbs.
382 views
Usually answered in minutes!
×