SOURCE: my 92 600 katana wont start. It wont even turn
If the clutch switch, the neutral safety switch, and the side stand switch are all working correctly, then test the starting system. When you push the starter button you should hear a click , so you know the button is working.Follow the positive battery cable to the starter solenoid. Disconnect the two wires that activate the solenoid, test the two wires from the harness make sure the needle on your voltage meter jumps when you push the starter button, this means the button is good. Take a wire and jump the two posts on the solenoid or touch the two cables together. If your starter works, then you need a new solenoid. If you hold the starter button and tap on the starter with a plastic hammer and the starter works you need new starter brushes. Anything else wrong with the starter and you need to replace the starter assembly , the manufacturer does not make replacement parts for the starter.
225 views
Usually answered in minutes!
×