How do you remove a oil cooler on a street glide special

Should be the same as 2013:

TOURING OIL COOLER

REMOVAL

Pull out on the bottom of the oil cooler cover to disengage the lower retaining pins, then pull the cover up and remove it. THEN remove the 2 screws that hold the oil cooler to the frame. THEN loosen the clamp and slide them down the oil hoses, disconnect the hoses from the oil cooler adapter and remove the oil cooler. (To remove the hoses from the oil cooler, cut clamps the clamps with side cutters).

INSTALLATION

Push the oil hoses onto the oil cooler fittings, align the hoses and tighten the hose clamps using special hose clamp pliers. THEN secure the cooler to the frame with the two fasteners and tighten them to 20-22 ft-lbs (27.1-29.8 Nm). THEN put clamps on the hoses, install the hoses onto the oil cooler adapter fittings and tighten the clamps. THEN install the oil cooler cover upper latches first and then push down and back to engage the lower pins into the grommets.