I have a 1980 Moto Guzzi Monza and need a conversion from KPH to MPH

Wow, so many possibilities, starter, seized engine, bad battery, bad switches, broken or open wire, loose connection, blown fuse. Try guzzitech.com or wildguzzi.

Moto Guzzi Moto Guzzi

Hopefully this will help. If not the scroll to the bottom of the home page and email him.
http://www.thisoldtractor.com/guzzi007/sportissimo.html

Need to replace choke pluger assmbly.Spring inside is worn out.

Try this site...

http://tbarnes.co.uk/TimsPages/CATERHAM/Kmh.htm

put the switch that says trip to the bottom most setting, then keep pressing the computer switch on the left bar bottom under the clutch lever, until it comes up with mph hold it down until it changes to kp scroll bk and you r good or just flip the switch back to trip

what can us Monza owners do? Mine desperately needs a new one. Are they the same as a Breva's? If they are where are the Factory obtaining them from for new build?I just had a butcher's at a parts list for newer small blocks and they have single row chaines... You could try Martin Hagermann at Guzzi Piu in Germany . He specialises in small blocks and got me some bits for the NTX that were not available anywhere else. There must be as many V50's and Monzas still around as the rest of the small blocs put together so someone somewhere has either got old stock or will find an alternative -hopefully !!!! A good reynolds industrial chain supplier could also help if there are any of those left in the UK.,,

Multiply anything you see on the speedo by 6, and drop the 0

40km = 24mph
50km = 30mph
60km = 36 mph
70km = 42mph
80km = 48mph
yada...yada... 100km - 60
EX and cheap!