SOURCE: yamaha R1 2004 timing cam chain setting
You will need a shop manual for this. It would take too much writing
SOURCE: what are the Valve clearances for a 2004 yamaha yz450f
Valve clearance (cold):
Intake:
0.10 ~ 0.15 mm (0.0039 ~ 0.0059 in.)
Exhaust:
0.20 ~ 0.25 mm (0.0079 ~ 0.0098 in.)
SOURCE: How much oil does a 2004 yamaha yz450f take?
It should take no more than about 2-4 bottles but if you want put a bottle in at a time and check the side glass of the motor and stand the bike straight to see were the level is, it should be at half or even a bit over is fine but no less, if one bottle doesnt do it then add another and another till it does but one bottle at a time.
SOURCE: what kind of engine oil does a 2004 yamaha yz450f
20w40 four stroke engine oil,
car oils will cause clutch slip
the semi synthetic and full synthetic are better oils but cost more.
Change the oil often, it only holds a bit over a litre
SOURCE: how do i adjust timing chain on a yamaha 650 seca?
On the back of the cylinders is the cam chain tensioner. Find the timing marks for the motor and set the motor to top dead center (TDC) on the compression stroke for the #1 cylinder. Piston up, both valves loose (not pressing on valves). Now loosen the bolt on top off the tensioner and tighten it back up. You have just adjusted your cam chain tensioner.
510 views
Usually answered in minutes!
×