My 1992 Suzuki GSX-R 600 is not getting fuel into my motor @
1. Make sure tank has fuel and is not stopped up. Make sure petcock is clean. If this is a vacuum feed - make sure the vacuum hose is not cracked or have any leaks. Disconnect the fuel like going to the carbs , then use a manual vacuum gage to pull vacuum on the petcock to see if it fuel from the carb lines. If it doesn't, you have isolated the issue! If it does flow fuel, reconnect the carb fuel lines, then remove the float bowls from the carbs then repeat the process, If no fuel is flowing out, you have found the problem, If it does flow, you fixed it
SOURCE: 2008 suzuki GSX 1000 motorcycle indicates on
FI = Fuel Injection. The FI computer is telling you that it has detected a problem and the code for that problem is "C13". Telephone your dealer and ask what that code C13 indicates is wrong. Then you can determine if you want to try the fix, i.e. "clean the air filter", or if the shop must do it, i.e. "# 3 injector is restricted".
A “very helpful” rating for this answer? Thanks!
SOURCE: fuel setting on GSX 600 R
Hi and welcome to FixYa,
"PRI" is a setting that would allow fuel to flow from the tank with or without the engine running.
"ON" and "RES" are settings that require engine to be running for the fuel to flow. It is a safety interlock on the petc0ck (fuel cut-off valve) and is activated with the presence of vacuum from the intake manifold. Vacuum will only exist if the engine is running.
Good luck and thank you for asking FixYa. Happy Holidays.
SOURCE: low beams dont work on my 98 GSX-R
more than likely it is nothing more than a blown low beam fillament in the globe apart from that the system may be fused on both high & low beam however Im not to sure about that on this model
SOURCE: were can I get a diagram of the fuel lines on a
try google images i found loads of useful diagrams wiring etc..
217 views
Usually answered in minutes!
×