This is on the screen, "your device needs to be restarted to increase performance. please wait while your data is safe. " I keep shutting it down and restarting but the same message appears.

If your Digital 2 tablet doesn't have volume buttons, you can still perform a factory reset using the following steps:

1. Power off your tablet: Hold down the power button until your tablet shuts off completely.
2. Hold down the power and home button: Once your tablet is powered off, hold down the power button and the home button simultaneously. The home button is the physical button located on the front of your tablet, usually below the screen.
3. Wait for the recovery screen to appear: Keep holding down the power and home button until the recovery screen appears. This may take a few seconds.
4. Navigate the recovery menu: Once you see the recovery menu, use the touch screen to navigate the options. Select "Wipe data/factory reset" using the volume buttons on the screen.
5. Confirm the reset: Use the touch screen to select "Yes - erase all user data" and confirm that you want to perform the factory reset.
6. Wait for the reset to complete: Once you confirm the reset, your tablet will erase all user data and reset to its original settings. This may take several minutes to complete.
7. Restart your tablet: Once the reset is complete, your tablet will automatically restart. You'll need to go through the initial setup process again, like you did when you first got the tablet.

Please note that a factory reset will erase all of your data, including apps, contacts, and media. Be sure to back up any important data before performing a factory reset.

In this case Kindle technician might be help you Just give them a call Kindle Technical Support Registration 877 690 9305

Does it have a RE SET I had Magellan 800, this had re set .

jst upgrade it

tested 100% working How to Factory Reset Your Android Phone or Tablet When It Won't Boot
Safe mode can help you troubleshoot your Android, but sometimes you'll need to wipe everything and restore your device to its factory state. You can even perform a factory reset when your Android phone or tablet won't boot normally.
Ensure you have any important data backed up before doing a reset. This includes your Google Authenticator credentials, which will be lost during the reset. Disable two-factor authentication on your accounts first or you'll experience some trouble afterwards.

If You Can't Boot

If safe mode doesn't help fix your device, you can perform a hard reset by booting into a special recovery mode. First, ensure your device is fully shut down.
Press and hold the correct keys to boot the device into recovery mode. This will vary from device to device. Here are some examples:

• Nexus 7: Volume Up + Volume Down + Power
• Samsung Galaxy S3: Volume Up + Home + Power
• Motorola Droid X: Home + Power
• Devices With Camera Buttons: Volume Up + Camera

Similar devices will likely use similar key combinations. For example, the Nexus 4 also uses Volume Up + Volume Down + Power.
If your device isn't on this list and none of the above methods work, do a Google search for the name of your device and "recovery mode" - or look in the device's manual or support pages.
Release the buttons when the device powered on. You'll see an image of an Android lying on its back with its chest open and its internals revealed.

Press the Volume Up and Volume Down keys to scroll through the options until you seeRecovery mode on the screen.

Press the Power button to restart into recovery mode. You'll soon see an Android with a red triangle.

Hold down the Power button and tap Volume Up. You'll see the Android system recovery menu appear at the top of your screen.

Select wipe data / factory reset with the volume keys and tap the Power button to activate it.
Select Yes - erase all user data with the volume buttons and tap Power. Your device will be reset to its factory state and all your data will be erased.

If your device freezes at any point, hold down the Power button until it restarts.

If You Can Boot

You can reset your Android phone or tablet normally from its Settings screen. Tap the Backup & reset option on the latest versions of Android or tap Privacy if you're using Android 2.3.

Tap the Factory data reset option and to through the reset of the steps to confirm the factory reset.

If the factory reset process doesn't fix your problems - or doesn't work at all - it's likely that there's a problem with your device's hardware. If it's still under warranty, you should have it fixed or replaced.
(There's one exception to this: If you've been flashing custom ROMs and messing with your device's low-level software, it's possible that you could have overwritten the stock recovery software. In this case, it's possible that you have a software problem and not a hardware problem.)


goodluck

To restart the device, just press on hold the power button or slide the switch to on position and hold until the unit turns off. You may also want to update your untits firmware. Please visit http://support.magellangps.com/support/index.php?_m=downloads&_a=view to see if there is an update available for your unit.

This is normal, this come straight of the satellite. To speed up process or bypass, reboot system. To Manually reboot this model, turn unit off like normal. Then when turning on, keep button down as it fires up, DO NOT release on button, keep it down until all fires up and even about 10 seconds passed, then let go. This reboots it and cleans up a lot of ****. Thanks Mike.

Please don't to vote or rate this , if I helped you. Thanks Mike

This is normal, sense they are are all controlled via safelight and computer , they are constantly updating. I recommend once a month you manually reboot gps, to keep bugs out as well as accurate speed and performance. To manually reboot, turn off like normal, but when turning on hold on button down and keep down through opening process for about 15 seconds then let go of on button. Then is cleaned up and rebooted. Thanks mike from fixya

i have a GPS Magellan 1440 and a error message: "your device needs to be restarted to increase performance", it's happening each time i try to enter a new address. Can you help me please, thank's!

on my magellan GPS I get the message "your device needs to be restarted to increase performance, Please wait while your data is saved