What is the valve clearance for a 2012 Kymco yager scooter

Hi,

You might try a different power socket to charge your scooter as the first one could be faulty. If this does not work, please use your scooter's manual troubleshooting section in order help overcome the issue. Thank you.

Question edited for clarity, name of the maker Kimco > Kymco.
Question moved from Cars and Trucks to correct category.

It is a model from 2012. Are you sure you have the 150cc and not the 50cc? They are restricted to 50mph.

You said "55 mph going down a hill with the wind at our back". Were you riding with a passenger, or it "our", you are the scooter? A 150 wouldn't do well with a passenger, and you would have to take into consideration your combined weight.

This is the specs, but take into account the Chinese are short, petite, lightweight people.

How fast does a KYMCO 150 go?
between 60 and 70 MPH Kymco's U.S. distributor told me that the 150's top speed is between 60 and 70 MPH and that the 250's top speed is between 70 and 80 MPH.

Kymco PEOPLE 150 Reviews on Cycle Insider

Here are some specs and reviews, but basically, if you want speed, you need a 250, scooters in general are not very aerodynamic! Of get a Honda Fireblade and do One HUNDRED and Sixty Five!

https://www.google.com/search?q=2021+kymco+super+8+150x+top+speed

..

My scooter has no spark how to fix. gy6 chinese ... - YouTube

? 2:29
https://www.youtube.com/watch?v=UU4S0Ov9q4c
Aug 24, 2012 - Uploaded by Rolling Wrench
Purchase our "NO SPARK KIT" click the link below: ... My scooter has no spark how to fix. gy6 chinese scooter 139qmb qmb13950cc 150cc.

Author Topic: people 50 2 stroke no spark CDI?? - KymcoForum.com

www.kymcoforum.com > Scooters - 50cc > People 50
Aug 5, 2012 - 7 posts - ‎4 authors I have a 2001 people 50 2 stroke that only has 125 original miles. ... I ordered a CDI and coil from monster parts and it still would not start . Author Topic: (Almost) no spark / engine not ...
15 posts
Aug 15, 2011
Kymco People 50 - Not A Morning Scooter ...
15 posts
Sep 28, 2010
Author Topic: 2005 People 50 2T Mods ...
15 posts
Jul 27, 2010
Kymco People 50 - KymcoForum.com
10 posts
Nov 15, 2008
More results from www.kymcoforum.com

there is a tip switch, bounce it to clear the switch to the open position, ,it is a kill switch,

I found an owner's instruction manual on the net in Spanish that says:
0,05 mm - 0,1 mm

This means that the valve clearance is 0.05 to 0.1 mm. A slightly tight adjustment using a 0.1 feeler gage should be ok and the real clearance would then probably be ca. 0.08 mm.

Although these answers are correct many are not probably. Valves are not going to go out of adjustment during the off season etc. You need to simplify it. You need gas, fire (spark) and air for a motor to run. Usually it will be the fact that the carb was not ran dry at the end of the season and fuel stabilizer was not used so the carb is dirty. You can pull you plug and see if it is wet with gas or try some engine starting fluid sprayed in the carb. Dry plug means no gas, no run with starting fluid mean no spark. Make sure fuel is on and the obvious has already been done. 90% chance dirty carb.

Valve clearance for Kymco Spike 125 ( cold )
Intake - 0.12 mm
Exhaust - 0.12 mm
If you have any doubts don't forget to post me a reply.If you are satisfied please rate my solution.