- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You may have a defective print head.
When you lift up the lid does the head move to the center?
If so do the ink cartridges light up?
If it moves to the center and no lights you need a new head.
Most likely need new head light lamp as usually there is two or three separate filament in side each head lights lamp and depend on make and model of any vehicles
The most common are head lights lamp with three filament .
One for day light ,one for low beam and last one for high beam
you probably dont need all that chek on the stering wheel sometimes they have a fuse in there see if yours has that trust me if yours have that fuse that might be the problem.
If the head light is just dim, open the fuse box and you'll find one of the fuses for the head lights has blown. Replace that and it'll work correctly. Rgards Johngee10
IT REALLY SOUNDS LIKE A HEAD GASKET AS FAR AS ABS IT COULD BE LOW ON BRAKE FLUILD OR BRAKES MAY NEED REPLACED OR ABS MODULE VERY DANGEROUS TO DRIVE WITH ABS LIGHT ON
you may need a new blower motor and they are simple to change out they are on the paeesenger side and held in by three screws and a plug. you put the new one in the same way as you took that one out
×