Just trying to fix an electrical problem on a friends bike. A factory wiring diagram would be very helpful in doing this.
SOURCE: 2002 FLHTCUI Electra Glide Ultra Classic: What's approx. cost for a stator / regulator repla...
HD = Hundred Dollars, voltage regulator.
Stator replacement = big dollars because labor intensive. The part is around $100, maybe more by now
Sorry
SOURCE: 2005 Harley Davidson FLHTCUI Electra Glide Ultra
To adjust the clutch, first find the clutch cable adjuster. It should be somewhere along the downtube of the frame in front of the engine. Slide the rubber bellows cover either up or down to expose the adjuster. Loosen the lock nut and turn the adjuster inwards shortening the cable as much as possible.
Remove the Derby cover from the primary cover. In the middle of the clutch assembly is an adjuster bolt and a lock nut. Loosen the lock nut and turn the adjust inwards until you feel a resistance. Don't not force the adjuster, go inwards until you feel the resistance of the throwout bearing on the other side. Try it a couple of times until you get the feel of it. Go inwards until you feel the resistance and then come back out 1/2 to 1 full turn. Lock the lock nut down and replace the derby cover.
Then go back to the cable aduster and and adjust the cable adjuster out until you have about an 1/8" freeplay at the lever. Lock that lock nut down and reposition the bellows cover.
Good Luck
Steve
SOURCE: 2004 FLHTCUI Electra Glide Ultra Classic: tire pressure for a 2004 ultra classic...
30 psi in the front and 36 in the rear for single rider. Two up riding, raise the rear tire to 40 psi.
Good Luck and Ride Safe
Steve
SOURCE: 2002 harley davidson electra glide ultra glide classic will not start
test batt--must be at 12.6 v for proper fire--mite hav a bad one or alternator is failin------get a book on maintenance details
793 views
Usually answered in minutes!
×