After 1 year in the garage, the signals don't work anymore. When you turn them on, you hear a click from the relais, but nothing more, nog signals work, also the dashboard signal lights don't work.
Sounds to me like the switch itself needs replaced. You could try pulling it apart and checking for corrosion and cleaning the contacts up but the switches are pretty cheap.
SOURCE: My 2004 gsxr 600 turn signals don't work. I have
have you changed the flasher relay to run led indicators if not you will need to you cant run standard bulb indicators and led together. and with the brake like sounds like pulling on the cable when on lock causing switch to stay on check that location of the wiring is correct and sufficient freeplay
SOURCE: We have a 2005 GS 500F. The turn signals stopped
Try replacing the indicator relay, the fuse won't just go unless the circuit has been overloaded (unlikely if you haven't touched it) the relay will be somewhere by the headlight, as for the fuses they usually are located to the left or right below where your handle bars are (under the plastic cover/fairing)
SOURCE: Turn signals, break lights and low beam on the hea...
"Don't work" - check the fuses in/under the right side pocket of the fairing above the battery.
"Show as faults on the LCD Display" - and are actually working - The OK monitor has gone bad, this can be bypassed easily, for details on either, join the email group via www.suzukicavalcade.com and ask the same question and you will get several replies.
SOURCE: i have a 1986 gsxr-r
The relay should be with the other relays, under the seat>
Does the light come on and stay on, if it does the relay is faulty or if they don't come on at all it could be the relay or fuse.
Hope this helps
170 views
Usually answered in minutes!
The fuses are all intact
×