Choke start my zzr will only fire up on choke

You have a problem with alternator .

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/paul_0aa451e2c4466dbf

Could be one of two things
1. The carbs are gummed up. Modern fuel will break down after only a few months. The idle jets are quite small and will easily become blocked. Strip and clean the carbs.
2. The throttle cable is sticky. Less likely, but possible. Make sure it opens and snaps shut easily.
What do you mean when you say you tried more air?

Hi
Firing order is 1:2:4:3
Firing mark is before T mark (TDC) when turning crank clockwise

Ride safe
Bike-Doc

Please rate this solution well (if it has helped !!)
Any comments welcome

Sounds like you are twisting the throttle while cranking. 4 strokes hate that. If that isn't the problem then try using half choke and no throttle. If it kinda "Pops" is what u mean by "catch the first time" then definately switch the choke to halfway after it "Pops".

Mistake #1, never try to jump start a motor bike, you may have blown the on board PC unit, best bet is to take it to good Kawka mechanic and let them fix it, bikes these days are fairly complicated..

sounds like a carb or carbs are clogged need to have them cleaned and synced
may also want to make sure you have spark at all 4 cylinders

try cleaning your carbs

have you checked the breather in the petrol tank
if its blocked it can cause this problem as the petrol gets vapour locked.

dirty choke valve or broken cable

make sure valve moves freely and fuel ports are opened not clogged

You need to clean your carbs. Something is gummed up inside. Most likely pilot jet, but need to clean and synchronize them.