Question about 2009 Keeway TX125 Enduro

Open Question

Keeway tx transmission oil


Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Fuel leek from the carbs overflow

Hi, Neil and the usual suspects are:
1. Damaged or restricted fuel tank venting system.
2. Loose float bowl screws.
3. Damaged float bowl o-ring.
4. improper fuel level in the float bowl.
5. Worn or dirty inlet valve or seat.
6. Damaged or leaking float assembly.
7. Particle contamination in inlet fitting cavity.
Good luck and have nice a day.

Btw, I’m available to help over the phone in case u need at

Nov 02, 2015 | Motorcycles

1 Answer

Fuel leek???

reserve is the back-up fuel, for when you have run out. switch it over to the regular flow and it will likely work

Nov 02, 2015 | Motion Pro Throttle Pull Cable - Yamaha...

1 Answer

Water in car

I suggest taking a garden hose and have someone spray your car while you are inside finding the leek stop the leek first .Take a house fan and an extention cord out to car, let fan blow on wet area until dry. another idea is to use a hair dryer. If you dont stop leek you will have a mold problem in no time. If this was helpful please leave good feedback.

Jun 28, 2013 | Cars & Trucks

1 Answer

Air noise when using break peddle in a 2002 Hyundai accent

The fluid leaking out the rear seal of the master cylinder has likely swelled/damaged the rubber diaphragm in your brake booster, causing the hissing sound. Unfortunately, you will need to replace your booster.

Feb 04, 2013 | 2002 Hyundai Accent

2 Answers

Just filled up brakefluid....drove 20kms and it's low again. whats the matter?

It has to be leaking somewhere.
Depending on the make model and year, it could be leaking at one of the wheels, or the master cylinder could be leaking into the booster and the engine is sucking the brake fluid into the intake.

Jan 11, 2013 | Cars & Trucks

1 Answer

Where can I find a schematic and detail strip instructions in order to completely disassemble my Kershaw Leek for cleaning?

there are several videos on you tube and torsion bar kershaw will do they are basically all the same. very simple take your time dont force anything watch videos several times if you have to

Mar 25, 2010 | Kershaw Knives Kershaw - Leek Series...

1 Answer

I have a leek of antifreeze it looks like it is coming from the hoses but possible it is coming from the junction that holds the seperate heating hoses together.where can i get that part from to stop the...

if it was me i would be looking around for a good salvage yard and you be about to get it cheaper give this website a try but call the Dodge dealership first to see if you be saving any money wish you the best of luck Michigan Man

Jan 04, 2010 | 1992 Dodge Caravan

1 Answer

1995 cavalier fuel injectors leek , i replaced o rings and still leek any service bulletins

You need to change the injector so I had to do the same, because the leek was over the injector housing.

Nov 01, 2009 | 1995 Chevrolet Cavalier

1 Answer

Leek at head entry hole

its a leak at the head entry hole. junk the car and take a loss. its useless

Aug 09, 2009 | 1998 Oldsmobile 88

Not finding what you are looking for?
2009 Keeway TX125 Enduro Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Keeway Experts


Level 3 Expert

84619 Answers

richard libby

Level 2 Expert

202 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

5851 Answers

Are you a Keeway Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides