The charging system is giving me 16,17, and 18 volts at 34 rpms.when let back to idle it comes back to 12volts.What is my problem??
SOURCE: Setting the clock
turn on the key, press both buttons until the time flashes, set the time then turn of the key AFAIK
SOURCE: FI light comes on. Honda CBR 600
FL stands for Fuel Injecton. Your fuel injection sensors have found a problem and the onboard computer chip is telling you. You must have a dealer read the computer code to find out what the problem is.
SOURCE: 02 cbr 600 f4i, red fi light flashes and bike
you have a fi fault revmove the seat cowl on the left hand sise you will see the cdi unit (black box with wires going to it) you should see a black conector with two wires going to it bridge the wires with a pice of wire or split pin turn the igntion switch on and count the blinks one long one means ten recored the the blinks and phone a dealer and ask them for the fault code.to reset the the light pull out the bridge and the light should stay on or blink repeted turn off the switch make sure the kill switch is set to run hope this helps
212 views
Usually answered in minutes!
×