Had new throttle cable fitted but it still over revs.would be grateful for some advice.
On the connection to the throttle there are two nuts. One long. The other short. The short one is the lock nut. Loosen the lock nut all the way towards the right side of the scooter then turn the longer nut towards the short nut while feeling the throttle play. Once you feel some slack then back the long nut off about 1/2 turn. You should have little play but not too much. 9 nice you find the sweet spot for the long nut turn the lock nut counter clockwise until it is snug to to the long nut. Use two wrenches one to hold the long nut. The other to tighten the short nut to the long nut.. This should help. If not then your problem lies in your idle adjust screw. YouTube has vids showing how to adjust that screw.
Weak return spring? Is routed correctly so it doesn't pull when the hadlebars are moved?
SOURCE: i took my carb off
if its the line at the very bottom of the carb its the overflow for the bowl and it doesnt go anywhere
SOURCE: Where is the VIN on my keeway hurricane?
if you look down from the handle bars to where your feet go you will see a little rectangle on the plastic, if you pop this off the VIN is underneath
SOURCE: what is the correct tyre
Look at the
sidewall of both tires. There will be a 'MAX PSI' embossed on the tire. It will
probably say Max 45 PSI. At 45psi the bike will ride like a rock. At 15psi it
will ride really squirrely. Find a psi at which you feel the bike
handles well and rides well. One rider may weigh 125 pounds and the next rider
may weigh 300 pounds. The best psi for each rider will be different due to
weight. Chances are that 30 to 35 psi will do the trick. Please take a moment to rate
my answer. Thanks.
SOURCE: Where is the gear oil
@tomhorton47
Hi I have the same question ! What gear oil should I replenish with ?
176 views
Usually answered in minutes!
×