84 hondia v65 1100 turnsig wont wark untill i hit off.

Software is wrong update software from Haier offical site

You will want to hold the key of whatever option you are programming (ie tv, aux) and the ok button when you let go the button you held will flash once or twice. Each time you hit the fast forward button the remote will cycle through a code. Keep hitting the fast forward button until your device turns off, then hit okay again.

fast flash indicates a bad bulb on that side, or possibly bad socket if new bulb good.

Shot in the dark but you might make sure you have a solid ground.

If turnsigals and wipers both are inop then your muli func swich is bad

Sometimes the long slide switch (pcb switch) gets worn with metal particles rubbed onto tracks from the contacts. The switch then has partial shorts and only works on certain positions. The track looks black when this happens. Clean with alcohol and rub vigorously with toothbrush and swabs.

turn it back on ... that should be it.

the fast idle is set when the choke is close to set the cam on the HIGH STEP. turn the car off hot, now pull the accelerator back and close the choke with your hand, now let the accelearator back to idle, now the idle is on the high step, carnk the car and set the idle speed, the base the fast idle screw is against the step on the pass side of carb.

I need the model receiver you have to do this.

IAM C0NNECTED TO MY COMPUTER BUT IT WOUNT WARK