At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Jan 5, 2013 - My Toyota Quantum 2.7GL idles but does not rev up. i ve changed the fuel pump and filter but still it starts, idles - Toyota 2007 Quantum 2.7 question. ...SOURCE: 1985 toyota 4x4 22re missing and rough idle. Have you pulled ...
Toyota quantum d4d idle but when u rev it doesn't pick up ...www.fixya.com/.../t24694524-toyota_quantum_d4d_idle_but_when_u_...Jun 24, 2014 - Toyota quantum d4d idle but when u rev it doesn't pick up reves - Toyota 2007 ... what will cause the car not to start after cylinder head repairs?Toyota quantum 2.7gl idles but when u rev it doesn not pick upwww.fixya.com/.../t17117064-toyota_quantum_2_7gl_idles_but_when_...Mar 14, 2013 - Toyota quantum 2.7gl idles but when u rev it doesn not pick up reves - Cars ... I have a 2006 toyota quantum,the engine starts,i doesn't idle,no ... and rear wheels will not drive? just makes terrible fringing noise but will drive in ...VWVortex.com - help, volkswagen idles but wont rev up 2liter 16 ...forums.vwvortex.com > ... > Golf II & Jetta II
Due to the amount of miles on it I would check the cat and the muffler to see if the exhaust is plugging up. It sounds like the engine is flooding and that is why you are seeing the black smoke when you rev it up. I would also check the ETC switch (it looks like a temp. sw) it sends a signal to the computer as to the outside temp and the amount of fuel need to fire the engine on start up until the idle air control kicks out.
>>The Following is the Instruction File for Setting the Air Mixture Screws. Any Input is Appreciated. The Procedure is the Same for 1 or 2 Mixture Screws, Just Use the Instruction File and Skip Over the Section with the Missing Mixture Screw ( Usually the H Mixture Screw). >>Now Setting the Air Mixture Screws: >>****Turn the Idle Air (L) and Main Air (H) Mixture Screws In Until SNUG **Do Not Jam** Then Reverse Both Screws 1 1/2 Turns. Set the Throttle Full Open, Start the Engine. >>Turn the Main Air (H) Mixture Screw Clockwise Until Proper Revs are Obtained. **Carefully Use your Finger and Move the Governor Arm to Rev the Engine (on Chainsaws and Trimmers Use the Trigger to Rev the Engine) Until you Reach Max RPMs (on Chainsaws and Trimmers, the RPMs are Not Set to MAX. Set to Max and then Reverse the Setting Screw 1/4 or 1/2 Turn. If the H Mixture Screw is Set too High; the Engine will be Starved for the Oil in the Gas and Damage the Piston and Jug/Cylinder) and the Engine is Running Proper at Full Throttle Up a Grade and for Chainsaws and Trimmers they Do Not Bog DOwn Under a Load. Occasionally you May have to Turn this Counter Clockwise to Achieve the Proper Revs.** >>Now Allow the Engine to Idle. Set the Engine Idle Screw (Not Idle Air) so the Engine will Stay Running if Required. >>Now Set the Idle Air (L) Mixture Screw so there is No Hesitation when Rapidly Throttling from Idle to Full Throttle. Reset the Engine Idle if Required.****
Please, Do Not Hesitate, If I Missed Something or you Hit a Snag or this Does Not Correct the Problem, I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Be Safe and Be Happy. Thanks.
×